GATE cutoff marks for IIT and NIT for SC category are 25-35% lower than the General category. Subject-specific minimum and maximum scores across IITs and NITs range between 17 and 26. This cut-off corresponds to around 300-400 raw scores. Top IITs require around 500-650 scores, while newer ones consider around 350-450.
GATE cutoff marks for NITs range around 400-500. A 450-600 cut-off is often seen for recruitment in PSU via GATE score. With 15% seats reserved for the SC category for IITs and NITs admissions through GATE, around 5000 candidates secure seats with these cut-offs.
- GATE SC cut-offs in top IITs for core branches like CSE, EE, and ME usually lie between 22 to 32 marks.
- GATE cutoff marks for IIT and NIT for SC category are lower than IITs, often ranging from 17 to 26.
- Every year, about 9000 to 11,000 SC candidates qualify for GATE, but 4500 to 5000 secure seats in IITS and top institutions.
- PSUs like AAI, BHEL, GAIL, and NTPC maintain SC cut-off around 65 to 75% of general category scores.
Also Read

Key Summary
- GATE cutoff marks for IITs range around 500-650 across institutions and courses.
- NITs GATE cutoff marks for SC fall between 400-500.
- High cut-offs are often seen in CSE, AI, and ECE around 500-650.
- Civil, Metallurgy often have lower cut-offs around 350-450.
- The qualifying scores across subjects range between 16-26.
- Every year, around 5000 candidates secure seats in IITs and NITs.
- 30-42% percent SC candidates have secured seats in IITs and NITs.
- With 15% reservation for SC;
- Around 2660 seats in IITs
- Around 3630 seats in NITs
- Around 1280 seats in IIITs are kept aside for SC category candidates.
GATE 2025 SC Category Qualifiers vs Seat Allocation
Metric | Value |
---|---|
SC qualifiers in GATE 2025 | 18000-25000 |
Total Seats across IITs, NITs, IIITs, and others | 7570 |
Seat allocated or secured | 30-42% |
Reservation | 15% |
Also Read
GATE 2025 Cut-off MarksGATE Cutoff Marks for IITs for SC category
- IIT Madras reported the lowest SC cut-off at 199 for metallurgy and the highest at 760 for EC, EE, and EP.
- IIT Bombay cut-off stood at 333(Civil)-635(CSE)
- IIT Delhi cut-offs for SC range between 310(Energy/Water) - 550(CSE)
- Mid-tier IITs show cau-offs between 227(Materials) - 485 (CSE)
- New IITs have lower range cut-offs from 300 for Civil and 390 for CSE.
- Across all IITs, the SC cut-off range is between 160-760, depending on the programs offered
IIT | Minimum Cutoff (Course) | Maximum Cutoff (Course) | Official PDF links |
---|---|---|---|
IIT Madras | 199 (Met. & Materials, 2024) | 760 (Microelectronics & VLSI, 2025) | M.Tech and M.A. Admission for the year 2025 at IIT Madras GATE Cut-off Score |
IIT Bombay | 333 (Civil Engg., 2025) | 635 (CSE, 2025) | IIT Bombay M. Tech, M.A. GATE 2025 cut off |
IIT Delhi | 310 (Energy/Water, 2024) | 550 (CSE, 2024) | NA for 2025 |
IIT Kanpur | 297 (Sustainable Energy, 2024) | 656 (Control & Automation, 2024) | NA |
IIT Kharagpur | 160 (Agri/Geo, 2025) | 598 (CSE, 2025) | JMP - 2024 GATE Score Cut-off |
IIT Roorkee | 280 (Chemical Engg., 2024) | 610 (CSE, 2024) | GATE 2024 IIT Roorkee cut-off |
IIT Guwahati | 290 (Civil Engg., 2025) | 610 (CSE, 2025) | IITG Admission |
IIT Ropar | 235 (Chemical Engg., 2025) | 519 (CSE, 2025) | NA for 2025 |
IIT Bhubaneshwar | 270 (Metallurgy, 2024) | 615 (CSE, 2024) | NA for 2025 |
IIT Dhanbad | 270 (Mining, 2024) | 384 (Applied Geology, 2024) | 2024 GATE cut-off |
IIT Gandhinagar | 400 (Civil, 2024) | 452 (CSE, 2024) | NA for 2025 |
IIT Hyderabad | 300 (Materials, 2024) | 620 (CSE, 2024) | NA for 2025 |
IIT Varanasi | 310 (Mechanical, 2024) | 600 (CSE, 2024) | NA |
IIT Indore | 227 (Materials, 2024) | 485 (CSE, 2024) | NA |
IIT Jodhpur | 280 (Mechanical, 2024) | 540 (CSE, 2024) | NA |
IIT Mandi | 295 (Civil, 2024) | 510 (CSE, 2024) | IIT Mandi GATE cut off 2025-26 |
IIT Patna | 260 (Mechanical, 2024) | 495 (CSE, 2024) | GATE cut-off Offer through COAP |
IIT Palakkad | 285 (Civil, 2024) | 470 (CSE, 2024) | NA for 2025 |
IIT Bhilai | 278 (Electrical, 2024) | 465 (CSE, 2024) | NA(GATE cut-off is followed) |
IIT Goa | 380 (Electrical, 2025) | 510 (CSE, 2025) | NA(GATE cut-off is followed) |
IIT Jammu | 300 (Civil, 2025) | 390 (CSE, 2025) | NA |
IIT Dharwad | 315 (Mechanical, 2025) | 400 (CSE, 2025) | GATE cut-off 2025-26 |
IIT Tirupati | 318 (Civil, 2024) | 449 (CSE, 2024) | NA for 2025 |

Also Read
IIT GATE CUtoff 2025 and the Previous Year Category Wise Opening and Closing Ranks for IITsGATE Cutoff Marks for NIT for SC category
- NIT SC cut-offs varied from 168 to 595, consistently peaking in CSE and AI-related branches.
- NIT Trichy had SC cut-offs from 168 (Materials Science) to 595 (CSE).
- NIT Warangal ranged between 233 (Welding/NDT) and 589 (CSE).
- NIT Surathkal recorded 213 (Materials Engineering) and peaked at 585 (CSE).
- NIT Rourkela displayed one of the widest gaps: 175 (Urban & Regional Planning) to 556 (CSE).
- NIT Calicut saw SC cut-offs at 200 (Environmental Engg.) up to 562 (CSE).
- New NITs like NIT Meghalaya and NIT Arunachal Pradesh had higher lower-bound cut-offs of 180–175, with maximums in CSE around 357–372.
Also Check GATE 2026 Cutoff Marks
NIT | Lowest Course | Lowest Cutoff | Highest Course | Highest Cutoff |
---|---|---|---|---|
NIT Tiruchirappalli | Material Science & Engineering | 168 | Computer Science & Engineering | 595 |
NIT Warangal | Welding Tech & NDT | 233 | Computer Science & Engineering | 589 |
NIT Surathkal (Karnataka) | Materials Engineering | 213 | Computer Science & Engineering | 585 |
NIT Calicut | Environmental Engineering | 200 | Computer Science & Engineering | 562 |
NIT Rourkela | Urban & Regional Planning | 175 | Computer Science | 556 |
MNNIT Allahabad | Medical Diagnostics & Devices | 181 | Computer Science & Engineering | 552 |
VNIT Nagpur | Chemical Engineering | 168 | Computer Science & Engineering | 510 |
MNIT Jaipur | Urban Planning | 181 | Computer Science & Engineering | 506 |
NIT Delhi | CAD/CAM | 265 | Computer Science & Engineering | 502 |
NIT Puducherry | Thermal Engineering | 241 | Computer Science & Engineering | 499 |
NIT Durgapur | Env. Science & Technology | 170 | AI & Data Science | 495 |
SVNIT Surat | Manufacturing Engineering | 217 | Computer Science & Engineering | 477 |
NIT Kurukshetra | Water Resources Engg. | 211 | Computer Engineering | 468 |
NIT Jamshedpur | Machine Design | 200 | Computer Science & Engineering | 456 |
MANIT Bhopal | Chemical Engineering | 188 | Artificial Intelligence | 453 |
Dr. B R Ambedkar NIT Jalandhar | Biotechnology | 168 | Computer Science & Engineering | 452 |
NIT Hamirpur | Energy Systems | 181 | Computer Science & Engineering | 447 |
NIT Goa | Power Electronics & Drives | 212 | Computer Science & Engineering | 446 |
NIT Silchar | Energy Systems Engg. | 184 | Computer Science & Engineering | 441 |
NIT Patna | Water Resources Engg. | 179 | Computer Science & Engineering | 436 |
NIT Raipur | Energy Systems & Pollution | 188 | Computer Science & Engineering | 433 |
NIT Meghalaya | Energy Engineering | 180 | Computer Science & Engineering | 372 |
NIT Uttarakhand | Structural Engineering | 182 | Computer Science & Engineering | 372 |
NIT Arunachal Pradesh | Innovation & Entrepreneurship | 175 | Computer Science & Engineering | 357 |
NIT Manipur | Power Electronics | 172 | Computer Science & Engineering | 355 |
NIT Sikkim | Power Electronics | 176 | Computer Science & Engineering | 361 |
NIT Srinagar | Structural Engineering | 183 | Computer Science & Engineering | 389 |
NIT Nagaland | Power Systems Engg. | 174 | Computer Science & Engineering | 345 |
NIT Agartala | Chemical Engineering | 168 | Artificial Intelligence | 402 |
NIT Mizoram | Thermal Engineering | 173 | Computer Science & Engineering | 338 |
Also Read
GATE NIT Cutoff 2026 Check Previous Year Opening and Closing Score(2025-2021)GATE Cutoff Marks for IIIT, DIAT, DIU & Non-NIT for SC category
-
IIIT Hyderabad marked SC cut-offs between 259–393, showing high competitiveness in CS.
- IIIT Allahabad had 193–460, while IIIT Pune stood at 295–443.
- IIST Thiruvananthapuram (Space Tech) recorded SC cut-offs 200–426, emphasising aerospace demand.
- DIAT Pune (Defence Tech) posted a range of 168–398, lower entry but strong upper cut-offs.
- University of Hyderabad registered 214–353 for M.Tech admissions via GATE.
- IIITDM institutes (Kurnool, Jabalpur, Sonipat, etc.) consistently showed ranges 200–325, with CS-related courses peaking near 380–400.
- Non-IIT/NIT cut-offs span 168–522, with IIITs and IIST being the most competitive.
Institute | Highest Cutoff | Lowest Cutoff |
---|---|---|
Atal Bihari Vajpayee IIIT Gwalior | 522 | 256 |
IIIT Allahabad | 460 | 193 |
IIIT Pune | 443 | 295 |
IIEST Shibpur (Howrah) | 431 | 168 |
IIST Thiruvananthapuram (Space Science & Tech) | 426 | 200 |
DIAT Pune (Defence Institute of Advanced Technology) | 398 | 168 |
IIIT Bhubaneswar | 397 | 261 |
JNU New Delhi | 393 | 276 |
IIIT Hyderabad (International Institute of Information Tech) | 393 | 259 |
IIIT Tiruchirappalli | 389 | 276 |
IIIT Lucknow | 389 | 327 |
Punjab Engineering College (PEC), Chandigarh | 381 | 217 |
IIIT Design & Manufacturing, Kancheepuram | 380 | 228 |
IIIT Vadodara | 373 | 260 |
IIIT Bangalore (International) | 370 | 285 |
IIIT Kottayam | 367 | 252 |
IIIT Design & Manufacturing, Jabalpur | 362 | 200 |
IIIT Una | 357 | 256 |
IIIT Ranchi | 354 | 270 |
University of Hyderabad | 353 | 214 |
IIIT Guwahati | 348 | 276 |
IIIT Kota | 344 | 261 |
IIIT Kalyani | 340 | 227 |
IIIT Manipur | 337 | 212 |
IIIT Nagpur | 333 | 222 |
IIIT Dharwad | 329 | 238 |
DTU Delhi Technological University | 328 | 210 |
IIITDM Kurnool | 325 | 211 |
IIITDM Diu | 323 | 209 |
IIITDM Sonipat | 319 | 217 |
IIIT Bhagalpur | 316 | 207 |
IIITDM Lucknow (new) | 314 | 208 |
IIITDM Raichur | 312 | 206 |
IIIT Sri City, Chittoor | 309 | 202 |
IIITDM Andhra Pradesh | 305 | 204 |
IIIT Bhopal | 303 | 203 |
IIIT Kurnool | 300 | 200 |
IIITDM Design University (new campus) | 297 | 201 |
Also Read
GATE College Predictor 2025GATE cutoff marks for IIT and NIT for SC category: Subject-wise Cutoff
- SC subject cut-offs ranged 16.3 to 26.6, with core engineering near 18–24, and sciences higher.
- Mechanical Engineering saw an SC cut-off at 23.8, among the higher subject thresholds.
- Computer Science required 19.4, while Electrical/Electronics had 16.6 each.
- Civil Engineering SC cut-off was 19.4, and Chemical Engineering stood at 18.4.
- Science-based disciplines showed tougher cut-offs: Geology (25.5), Physics (17.8), Chemistry (16.3).
- Data Science/AI had 19.3, close to CSE.
- Humanities/social science papers (Economics, Psychology, Sociology) were high at 26.6.
Subject | SC cut-off |
---|---|
Aerospace Engineering | 19.2 |
Agricultural Engineering | 16.6 |
Architecture and Planning | 26.6 |
Biomedical Engineering | 19.4 |
Biotechnology | 18.6 |
Civil Engineering | 19.4 |
Chemical Engineering | 18.4 |
Computer Science and Information Technology | 19.4 |
Chemistry | 16.3 |
Data Science and Artificial Intelligence | 19.3 |
Electronic and Communication Engineering | 16.6 |
Electrical Engineering | 16.6 |
Environmental Science and Engineering | 19.4 |
Ecology and Evolution | 26.3 |
Geomatics Engineering | 17.1 |
Geology | 25.5 |
Geophysics | 26.6 |
Instrumental Engineering | 17 |
Mathematics | 16.6 |
Mechanical Engineering | 23.8 |
Mining Engineering | 20.4 |
Metallurgical Engineering | 26.6 |
Naval Architecture and Marine Engineering | 16.7 |
Petroleum Engineering | 20.7 |
Physics | 17.8 |
Production and Industrial Engineering | 23.7 |
Statistics | 20.1 |
Textile Engineering and Fibre Science | 23.1 |
Engineering Sciences | 23.5 |
Economics | 26.6 |
English | 26.6 |
Linguistics | 26.6 |
Philosophy | 26.6 |
Psychology | 26.6 |
Sociology | 26.6 |
Life Science |
Also Read
IIT GATE Cutoff 2025 and the Previous Year Category Wise Opening and Closing Rank for IITs
GATE cutoff marks for IIT and NIT for SC category: PSU cut-off for Recruitments
- AAI (Airports Authority) ATC cut-off for SC remained 92–95, while JE roles ranged 40–77 across disciplines.
- DRDO Scientist-B SC cut-offs were 16.6–21.6, varying by engineering stream.
- NTPC SC cut-offs were 41 (Electronics) to 58.95 (Mechanical).
- ONGC showed some of the highest PSU SC cut-offs: 734–760 (AEE Mech/Civil), 617–635 (Electronics), and 691–700 (Electrical).
- NPCIL SC cut-offs stood at 557 (Chemical) up to 653 (Electronics).
- BHEL maintained 53.9–61.3 across Mechanical, Electrical, Electronics, and Metallurgy.
- GAIL had SC cut-offs between 56–73.7, depending on discipline, with new 2025 data at 45–46 for Electrical.
PSU | Role / Discipline | SC Cut-off (Score/Range) |
AAI | Air Traffic Controller (ATC) | 92–95 |
AAI | Junior Engineer – Civil Engg. | 62.8 |
AAI | Junior Engineer – Electrical. | 77 |
AAI | Junior Engineer – Electronics | 47.3 |
AAI | Junior Engineer – Architecture | 40-60 |
DRDO | Scientist ‘B’ – Computer Science | 21.6 |
DRDO | Scientist ‘B’ – Mechanical Engg. | 18.9 |
DRDO | Scientist ‘B’ – Electrical Engg. | 16.6 |
DRDO | Scientist ‘B’ – Civil Engg. | 17.7 |
DRDO | Scientist ‘B’ – Chemical Engg. | 21.4 |
DRDO | Scientist ‘B’ – Aerospace Engg. | 16.7 |
NTPC | Engineer Trainee – Electrical Engg. | 50.33 |
NTPC | Engineer Trainee – Electronics Engg. | 41.0 |
NTPC | Engineer Trainee – Mechanical Engg. | 58.95 |
ONGC | Graduate Trainee – Geologist | 557–600 |
ONGC | Graduate Trainee – AEE (Mechanical) | 734–750 |
ONGC | Graduate Trainee – AEE (Electronics) | 617–635 |
ONGC | Graduate Trainee – AEE (Electrical) | 691–700 |
ONGC | Graduate Trainee – AEE (Civil) | 740–760 |
ONGC | Graduate Trainee – Geophysicist (Wells) | 540–550 |
ONGC | Graduate Trainee – Geophysicist (Surface) | 250–280 |
NPCIL | Executive Trainee – Civil Engg. | 602 |
NPCIL | Executive Trainee – Electrical Engg. | 600 |
NPCIL | Executive Trainee – Electronics & Comm. | 653 |
NPCIL | Executive Trainee – Mechanical Engg. | 611 |
NPCIL | Executive Trainee – Chemical Engg. | 557 |
NPCIL | Executive Trainee – Instrumentation Engg. | 477 |
IOCL | Assistant Officer – Electrical Engg. | 53.99 |
IOCL | Assistant Officer – Electronics Engg. | 56.46 |
IOCL | Assistant Officer – Civil Engg. | 69.92 |
IOCL | Assistant Officer – Mechanical Engg. | 71.82 |
IOCL | Assistant Officer – CSE/IT | 64.29 |
BHEL | Mechanical Engineering | 61.33 |
BHEL | Electrical Engineering | 53.99 |
BHEL | Electronics Engineering | 56.46 |
BHEL | Metallurgy Engineering | 56.67 |
GAIL | Electrical Engineering | 66.24 |
GAIL | Mechanical Engineering | 73.72 |
GAIL | Chemical Engineering | 60.75 |
GAIL | Instrumentation Engineering | 56.23 |
GAIL | Business Info Systems | 61.82 |
GAIL | Telecom / Telemetry | 66.34 |
GAIL | Electrical (2025) Exec Trainee | 45–46 |
IOCL | Civil Engineering | 54.91 |
IOCL | Mechanical Engineering | 57.67 |
IOCL | Electrical Engineering | 39.88 |
IOCL | Electronics Engineering | 47.74 |
IOCL | Instrumentation Engineering | 41.03 |
IOCL | CSE & IT | 47.66 |
GATE cutoff marks for IIT and NIT for SC category FAQs
Ques. What is the GATE score required for IIT for the SC category?
Ans: For IITs, SC cutoffs usually range between 300–500 for most core branches.
- High-demand courses like CSE or VLSI at IIT Bombay, Delhi, and Madras require 500–600+.
- Less competitive programs (Metallurgy, Civil, Earth Sciences) admit students at 200–300.
- A GATE score of 450+ gives strong chances in mid-tier IITs.
Ques. What is the GATE cutoff for IIT and NIT?
Ans: IIT SC cutoff: 199 (IIT Madras, Metallurgy) to 760 (IIT Madras, Microelectronics).
- NIT SC cutoff: 168 (NIT Trichy, Materials Science) to 595 (NIT Trichy, CSE).
- For mid-level NITs, Computer Science closes at 430–510.
Ques. Can I get IIT with 40 marks in GATE?
Ans: 40 marks usually convert to a score of 350–380.
- You can get into Civil, Metallurgy, and Earth Sciences.
- You cannot get into high-demand programs like CSE, Mechanical, or ECE at top IITs.
- New IITs like Jammu, Goa, and Bhilai admit candidates with this range.
- Reserved and PWD category candidates have a high chance of securing seats in mid-tier and new IITs with this score.
Ques. How many marks is a 450 GATE score?
Ans: A score of 450 corresponds to 45–48 marks depending on paper difficulty.
- This score is strong for mid-tier IITs and top NITs in Civil, Chemical, and Electrical.
Ques. How many marks is a 500 GATE score?
Ans: A score of 500, 50–55 marks in most branches.
- This score is strong for mid-tier IITs and top NITs in Civil, Chemical, and Electrical.
- If you are a candidate of the reserved category, you can even get into IITs’ low-demand programs.
Ques. What is a good GATE score for a PSU job?
Ans: SC candidates are usually shortlisted in a 45–65 score range (depending on PSU).
- NTPC & IOCL Mechanical: 58–72 score.
- BHEL: 53–61 score.
- GAIL: 56–74 score.
- A GATE score of 500–600 is considered solid for PSU calls.
Ques. How many students appeared for GATE 2025 branch-wise?
Ans: Total 7.5 lakh applicants, with 6.2 lakh actual test takers.
- CSE: 1.2 lakh, ECE: 1.0 lakh, ME: 1.1 lakh, CE: 90k.
- Smaller branches (Metallurgy, Mining, Petroleum): 5k–15k each.
Ques. What is the salary in PSU after GATE?
Ans: Entry-level PSU package: ₹10–14 LPA.
- NTPC, ONGC, IOCL: ₹12–13 LPA (CTC).
- BHEL, GAIL: ₹11–12 LPA.
- In-hand salary is usually ₹65,000–80,000/month, with allowances.
Ques. How much GATE score is required for DRDO?
Ans: Scientist ‘B’ shortlisting for SC requires around 16–22 marks (raw) 350–450 score.
- CSE/Mechanical cutoff is slightly higher at 20–22 marks.
- Civil, Chemical, and Aerospace are lower at 16–18 marks.
- DRDO places a heavy weight on written + interview after GATE.
Ques. What is the cutoff score for ISRO GATE?
Ans: SC cutoff for Scientist/Engineer ranges from 45–55 marks.
- In score, it means 500–550 depending on the discipline.
- Electronics & Mechanical cutoffs are the highest, near 540–560.
- Civil/Metallurgy remains lower, at 470–500.
Ques. How many years is the GATE score valid for PSU?
Ans: For PSUs, the score is valid only for the recruitment year.
- GATE score validity: 3 years for M.Tech admissions.
- For example, the GATE 2025 score is valid for PSU jobs in 2025 only.
Also Read
Comments