List of top Engineering Graphics Questions asked in Common University Entrance Test

Match the List I with List II

LIST I		LIST II
A	B.S.W. Thread	I	Semicircle on opposite side
B	Metric External Tread	II	Both crest and root are flat
C	Square Thread	III	Rounded equally at root and crest
D	Knuckle Thread	IV	Crest flat and root rounded

Choose the correct answer from the options given below:

Match the List I with List II

LIST I  (Conventional representation of v-thread)		LIST II (orthographic view)
A	External V-thread in the front view	I
B	Internal V-thread in the side view	II
C	External V-thread in the side view	III
D	Internal V-thread in the front view	IV

Choose the correct answer from the options given below:

Match the List I with List II

LIST I		LIST II
A	Turnbuckle joint	I	Journal Bearing
B	Flange joint	II	Square Rod joint
C	Bush Bearing	III	Pipe joint
D	Gib and cotter joint	IV	Tie-rod joint

Choose the correct answer from the options given below:

Identify the correct statement for Isometric Projection of a sphere
A. Its diameter is foreshortened.
B. Its isometric projection appears as circle.
C. Its isometric projection is drawn by taking an angle of 60 with the horizontal reference line.
D. Its diameter is drawn using true scale.
E. Its isometric projection appears as hemisphere.
Choose the correct answer from the options given below:

Match the List I with List II

LIST I		LIST II
A	Isometric projection	I	Angle between two  principal planers is 900
B	Dimetric projection	II	All the angles between principal axes are unequal and not less than 900
C	Trimetric projection	III	All the angles between principal axes are equal.
D	Orthographic projection	IV	Only two angles between three principle axes are equal

Choose the correct answer from the options given below:

Match the List I with List II on the basis of the given figure.

LIST I		LIST II
A	Bottom solid	I	Vertical
B	Top solid	II	Horizontal
C	Axis of top solid	III	Equilateral Triangular Prism
D	Axis of bottom solid	IV	Circular salab

Choose the correct answer from the options given below:

Identify the correct statement for Stud:
A. stud is a permeant fastener.
C. A stud is a cylindrical rod, having threads on both ends.
D. It is always used with cotter
E. It is used where there is no place for the bolt head.
Choose the correct answer from the options given below:

Match the List I with List II

LIST I Hexagonal headed bolt		LIST II ('d' is the nominal diameter)
A	Thickness of head	I	d
B	Threaded length of shank	II	0.8d
C	Radius of are showing conventional end of the shank in its front view	III	2d+6
D	Width across the flats of head	IV	1.5 d+3

Choose the correct answer from the options given below:

Identify the correct statement for the screw threads
A. A square thread of nominal diameter =30 mm and pitch =6 mm is designated as K 30 x 6.
B. Knuckle threads are used on necks of glass bottles.
C. Square threads offers less frictional resistance.
D. The angle between flacks of metric threads is 55⁰
E. The flacks of B.S.W. thread are equally rounded at both crest and root.
Choose the correct answer from the options given below:

Identify the correct statement for a Gin and Cotter joint:
A. The Gib has the same thickness as that of the cotter.
C. Two cotters are used in this joint.
D. Cotter is made of plastic.
E. Rods are of circular shape in this joint.
Choose the correct answer from the options given below:

This bearing /Joint is useful for higher loads at medium speed

Identify the correct statement for the given figure

A. A pentagonal prism is resting on H.P. on its base.
B. Axis of pyramid is perpendicular to V.P
C. Axis of pyramid is perpendicular to H.P.
D. A pentagonal pyramid is resting on H.P. on its apex.
E. Length of its axis is 35 mm.
Choose the correct answer from the options given below:

In flange pipe joint, if it is mentioned SQ Headed Bolt MS-4 OFF. What is the meaning of 4 OFF?

A machine part which prevents slacking of the joint besides holding the jaws of the strap from opening wide when the cotter is inserted

In Turnbuckles joint, the two rods have ____ screw threads.

In a sleeve and cotter joint, each rod has____ rectangular hole(s) for the insertion of cotter at right angle to the axis

Identify the correct statement for the given figure

A. Axes of both solids are perpendicular to H.P.
B. Axis of cylinder is perpendicular to V.P. and axis of hemisphere is perpendicular to H.P
C. A hemisphere is resting on the circular face of a hemisphere.
D. A hemisphere is resting on a cylinder.
E. A horizontal cylinder is resting on a hemisphere.
Choose the correct answer from the options given below:

Length of mental end for a Square neck stud of diameter ‘d=30 mm' can be ____.

The thickness of collar in a collar stud of diameter 30 mm is:

open Bearing is used for___

This assembly has an oil hole

In the top view of a vertical pan Heat Rivet of diameter 20 mm, ____ is the diameter of the outer circle.

In conventional representation of V-thread, the side view shows a complete thick circle representing the ____.

Revets are not used in ____.

Thread profile on an electric bulb: