Select Goal &
City
Select Goal
Explore
Question:
Identify the correct statements for the Gib and cotter joint:
(A) In gib and cotter joint two cotters are used.
(B) Cotter is a permanent fastener.
(C) Usually taper ratio of cotter is taken as 1:30.
(D) The thickness of gib is same as that of cotter.
(E) Both gib and cotter have taper on their all edges.
Choose the correct answer from the options given below:
Identify the correct statements for the Gib and cotter joint:
(A) In gib and cotter joint two cotters are used.
(B) Cotter is a permanent fastener.
(C) Usually taper ratio of cotter is taken as 1:30.
(D) The thickness of gib is same as that of cotter.
(E) Both gib and cotter have taper on their all edges.
Choose the correct answer from the options given below:
(A) In gib and cotter joint two cotters are used.
(B) Cotter is a permanent fastener.
(C) Usually taper ratio of cotter is taken as 1:30.
(D) The thickness of gib is same as that of cotter.
(E) Both gib and cotter have taper on their all edges.
Choose the correct answer from the options given below:
Updated On: Sep 18, 2024
- (C) and (D) Only
- (A) and (B) Only
- (D) and (E) Only
- (B) and (C) Only
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
The correct option is (A): (C) and (D) Only
Was this answer helpful?
0
0
Top Questions on Joints
- Match List I with List II:Choose the correct answer from the options given below:
List I
List II
A EFibrous joints I Adjacent vertebrae, limited movement B Cartilaginous joints II Humerus and Pectoral girdle, rotational movement C Hinge joints III Skull, don’t allow any movement D Ball and socket joints IV Knee, help in locomotion - Match the configurations of the listed 3 degrees-of-freedom industrial robots with the type of joints.
Configuration Type of joints P Cartesian 1 One prismatic and two rotary Q Cylindrical 2 Three rotary R Spherical 3 Two prismatic and one rotary S Articulated 4 Three prismatic - Choose the incorrect statement for Sleeve and cotter joint :
- Turnbuckle joint is not used in _____.
- In flange pipe joint, both flanges with gasket in between them are connected together by____.
View More Questions
Questions Asked in CUET exam
- A molecule X associates in a given solvent as per the following equation:
X ⇌ (X)n
For a given concentration of X, the van’t Hoff factor was found to be 0.80 and the
fraction of associated molecules was 0.3. The correct value of ‘n’ is:- CUET (UG) - 2024
- Solutions
- If \(A = \begin{bmatrix} 3 & 2 \\ -1 & 1 \end{bmatrix} \quad \text{and} \quad B = \begin{bmatrix} -1 & 0 \\ 2 & 5 \\ 3 & 4 \end{bmatrix},\)then \((BA)^T\) is equal to:
- CUET (UG) - 2024
- Matrices
- Subject to constraints: 2x + 4y ≤ 8, 3x + y ≤ 6, x + y ≤ 4, x, y ≥ 0; The maximum value of Z = 3x + 15y is:
- CUET (UG) - 2024
- Maxima and Minima
- If \( A = \begin{bmatrix} K & 4 \\ 4 & K \end{bmatrix} \) and \( |A^3| = 729 \), then the value of \( K^8 \) is:
- CUET (UG) - 2024
- Matrices
- A company produces 'x' units of geometry boxes in a day. If the raw material of one geometry box costs ₹2 more than the square of the number of boxes produced in a day, the cost of transportation is half the number of boxes produced in a day, and the cost incurred on storage is ₹150 per day. The marginal cost (in ₹) when 70 geometry boxes are produced in a day is:
- CUET (UG) - 2024
- Profit and Loss
View More Questions
SUBSCRIBE TO OUR NEWS LETTER
COLLEGE NOTIFICATIONSEXAM NOTIFICATIONSNEWS UPDATES
Download the Collegedunia app on 
© 2024 Collegedunia Web Pvt. Ltd. All Rights Reserved