Select Goal &
City
Select Goal
Explore
Question:
Identify the correct statements for Sleeve and Cotter Joint.
A) This joint is used to connect two round rods.
B) In this joint gib is used with cotter.
C) This joint is used to join two rectangular rods.
D) Cotters are inserted in sleeve at right angle to axes of rods.
E) Taper of cotter is usually 1:40.Choose the correct answer from the options given below:
Identify the correct statements for Sleeve and Cotter Joint.
A) This joint is used to connect two round rods.
B) In this joint gib is used with cotter.
C) This joint is used to join two rectangular rods.
D) Cotters are inserted in sleeve at right angle to axes of rods.
E) Taper of cotter is usually 1:40.
A) This joint is used to connect two round rods.
B) In this joint gib is used with cotter.
C) This joint is used to join two rectangular rods.
D) Cotters are inserted in sleeve at right angle to axes of rods.
E) Taper of cotter is usually 1:40.
Choose the correct answer from the options given below:
Updated On: Sep 16, 2024
- A and D only
- B and E only
- C and D only
- B and C only
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
The correct option is (A): A and D only
Was this answer helpful?
0
0
Top Questions on Cotter joints for round rods
- Sleeve and cotter joint is useful for _______ of axial loads.
- CUET (UG) - 2023
- Engineering Graphics
- Cotter joints for round rods
- In a cotter joint, the tapering on one side of cotter ________.
- CUET (UG) - 2023
- Engineering Graphics
- Cotter joints for round rods
- Identify the correct statement for a Gin and Cotter joint:
A. The Gib has the same thickness as that of the cotter.
C. Two cotters are used in this joint.
D. Cotter is made of plastic.
E. Rods are of circular shape in this joint.
Choose the correct answer from the options given below:- CUET (UG) - 2023
- Engineering Graphics
- Cotter joints for round rods
- In a sleeve and cotter joint, each rod has____ rectangular hole(s) for the insertion of cotter at right angle to the axis
- CUET (UG) - 2023
- Engineering Graphics
- Cotter joints for round rods
- A machine part which prevents slacking of the joint besides holding the jaws of the strap from opening wide when the cotter is inserted
- CUET (UG) - 2023
- Engineering Graphics
- Cotter joints for round rods
Questions Asked in CUET exam
- A molecule X associates in a given solvent as per the following equation:
X ⇌ (X)n
For a given concentration of X, the van’t Hoff factor was found to be 0.80 and the
fraction of associated molecules was 0.3. The correct value of ‘n’ is:- CUET (UG) - 2024
- Solutions
- If \(A = \begin{bmatrix} 3 & 2 \\ -1 & 1 \end{bmatrix} \quad \text{and} \quad B = \begin{bmatrix} -1 & 0 \\ 2 & 5 \\ 3 & 4 \end{bmatrix},\)then \((BA)^T\) is equal to:
- CUET (UG) - 2024
- Matrices
- Subject to constraints: 2x + 4y ≤ 8, 3x + y ≤ 6, x + y ≤ 4, x, y ≥ 0; The maximum value of Z = 3x + 15y is:
- CUET (UG) - 2024
- Maxima and Minima
- If \( A = \begin{bmatrix} K & 4 \\ 4 & K \end{bmatrix} \) and \( |A^3| = 729 \), then the value of \( K^8 \) is:
- CUET (UG) - 2024
- Matrices
- A company produces 'x' units of geometry boxes in a day. If the raw material of one geometry box costs ₹2 more than the square of the number of boxes produced in a day, the cost of transportation is half the number of boxes produced in a day, and the cost incurred on storage is ₹150 per day. The marginal cost (in ₹) when 70 geometry boxes are produced in a day is:
- CUET (UG) - 2024
- Profit and Loss
View More Questions
SUBSCRIBE TO OUR NEWS LETTER
COLLEGE NOTIFICATIONSEXAM NOTIFICATIONSNEWS UPDATES
Download the Collegedunia app on 
© 2024 Collegedunia Web Pvt. Ltd. All Rights Reserved