List of top Nanoelectronics Questions on Electronics asked in CUET (PG)

In optical fibers, does the core or the cladding have a higher refractive index?
For an ideal op-amp, what is the output voltage if the feedback resistance is equal to the input resistance in an inverting configuration?
In a BJT, what is the primary consequence of the Early effect on the effective base width?
In a circuit, the maximum power will be transferred only if the load resistance is equal to ...........
Choose the correct statement from the options below:
The voltage across the inductor for \( t > 0 \) in the given circuit is:
The cutoff frequency of a first order low pass filter for \(R_1 = 1.2 \, \text{k}\Omega\) and \(C_1 = 0.02 \, \mu F\) is:
A multiplexer (MUX)
(A) is a parallel to serial converter
(B) is also known as data distributor
(C) can be used as a logic function generator
(D) switch the data from several lines to one line

Choose the correct answer from the options given below:
A 32:1 Mux can be designed using:
To expand a 4-bit parallel adder to an 8-bit parallel adder, we can
(A) use two 4-bit adders and connect the sum output of one to the input bit of the other
(B) use four 4-bit adders with no interconnections
(C) use two 4-bit adders with the carry output of one connected to the carry input of the other
(D) use eight 4-bit adders with no interconnections
Which of the following statement(s) about Digital-to-Analog (DAC) converter is/are correct?
(A) DAC is said to be monotonic if its output decreases as the binary input is incremented from one value to the next.
(B) Ideally, the output of a DAC should be zero when the binary input is zero.
(C) The operating speed of a DAC is usually specified by giving its settling time.
(D) Resolution is the reciprocal of the number of discrete steps in the full-scale output of the DAC.