>
Agricultural Engineering and Technology
List of top Agricultural Engineering and Technology Questions on Material Handling and Conveying
Which type of idler is used in belt conveyor for transporting granular materials having an angle of repose of not less than 35\(^\circ\)?
ICAR AIEEA (PG) - 2024
ICAR AIEEA (PG)
Agricultural Engineering and Technology
Material Handling and Conveying
In a belt conveyor, drive unit is coupled
ICAR AIEEA (PG) - 2023
ICAR AIEEA (PG)
Agricultural Engineering and Technology
Material Handling and Conveying
Process of cooling or heating of air without changing the humidity ratio is represented on a psychrometric chart by
ICAR AIEEA (PG) - 2023
ICAR AIEEA (PG)
Agricultural Engineering and Technology
Material Handling and Conveying
A multiple effect evaporator is one in which
A. Vapour from one effect is used directly as the heating medium in the next.
B. The pressure of vapour is increased and the resulting high pressure steam is re‐used as a heating medium
C. Vapour is used to heat the incoming feed liquor or condensed vapour is used to raise steam in a boiler
D. Vapours from one effect is not utilized in heating
E. Vapours are condensed and condensed liquid is further heated
Choose the correct answer from the options given below:
ICAR AIEEA (PG) - 2023
ICAR AIEEA (PG)
Agricultural Engineering and Technology
Material Handling and Conveying
Carrying capacity of a bucket elevator having 4 buckets per meter moving at a speed of 1 m/minute, with bucket holding capacity \(0.1\text{ m}^3\), will be
ICAR AIEEA (PG) - 2020
ICAR AIEEA (PG)
Agricultural Engineering and Technology
Material Handling and Conveying