>
TS PGECET
>
Instrumentation Engineering
List of top Instrumentation Engineering Questions on Basics of Circuits asked in TS PGECET
For a series RLC circuit, the impedance locus is plotted in the complex plane, the impedance circle is at
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
Which of the following is TRUE?
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
A \(50\,\mathrm{Hz}\) sinusoidal voltage has a peak value of \(141\,\mathrm{V}\). Its RMS value is
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
In a parallel resonant circuit, the line current at resonance is
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
A series RLC circuit has \(L=0.1\,\mathrm{H}\) and \(C=10\,\mu\mathrm{F}\), then the resonant frequency is
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
Which of the following best represents an ideal current source?
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
A series RLC circuit has \(L=0.5\,\text{H}\), \(C=0.02\,\text{F}\). For critical damping, the required resistance \(R\) is
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
An AC circuit has \(V_{\mathrm{rms}}=230\,\mathrm{V}\), \(I_{\mathrm{rms}}=5\,\mathrm{A}\) and power factor \(=0.8\), then the active power consumed is
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
Biot--Savart's law is most suitable for calculating magnetic field due to
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
If a solenoid has \(500\) turns, length \(0.5\,\text{m}\) and cross-sectional area \(4\times10^{-4}\,\text{m}^2\), then its self-inductance is
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
Magnetic flux through a coil changes from \(8\ \mathrm{mWb}\) to \(2\ \mathrm{mWb}\) in \(0.2\ \mathrm{s}\). What is the induced emf?
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
A capacitor of \(50\,\mu\mathrm{F}\) is connected to a \(200\ \mathrm{V}\) battery. A dielectric of \(K=4\) is inserted. Find the new capacitance and stored energy.
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
For a series RLC circuit, the impedance locus is plotted in the complex plane, the impedance circle is at
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
In a parallel resonant circuit, the line current at resonance is
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
Which of the following is TRUE?
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
A \(50\,\mathrm{Hz}\) sinusoidal voltage has a peak value of \(141\,\mathrm{V}\). Its RMS value is
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
If a solenoid has \(500\) turns, length \(0.5\,\text{m}\) and cross-sectional area \(4\times10^{-4}\,\text{m}^2\), then its self-inductance is
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
Which of the following best represents an ideal current source?
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
A series RLC circuit has \(L=0.5\,\text{H}\), \(C=0.02\,\text{F}\). For critical damping, the required resistance \(R\) is
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
An AC circuit has \(V_{\mathrm{rms}}=230\,\mathrm{V}\), \(I_{\mathrm{rms}}=5\,\mathrm{A}\) and power factor \(=0.8\), then the active power consumed is
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
A series RLC circuit has \(L=0.1\,\mathrm{H}\) and \(C=10\,\mu\mathrm{F}\), then the resonant frequency is
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
Magnetic flux through a coil changes from \(8\ \mathrm{mWb}\) to \(2\ \mathrm{mWb}\) in \(0.2\ \mathrm{s}\). What is the induced emf?
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
A capacitor of \(50\,\mu\mathrm{F}\) is connected to a \(200\ \mathrm{V}\) battery. A dielectric of \(K=4\) is inserted. Find the new capacitance and stored energy.
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
Biot--Savart's law is most suitable for calculating magnetic field due to
TS PGECET - 2026
TS PGECET
Instrumentation Engineering
Basics of Circuits
Which of the following is a derived unit in the SI system?
TS PGECET - 2024
TS PGECET
Instrumentation Engineering
Basics of Circuits
Prev
1
2
Next