To solve this problem, we need to find the ratio of the radius of gyration of a solid sphere to that of a thin hollow sphere, both having the same mass \(M\) and radius \(R\).
1. Radius of gyration: The radius of gyration \(K\) of an object is defined as the distance from the axis of rotation at which the entire mass of the body can be assumed to be concentrated to provide a moment of inertia \(I\). Mathematically, \(K = \sqrt{\frac{I}{M}}\).
2. Solid sphere: For a solid sphere, the moment of inertia about its axis is \(I_s = \frac{2}{5}MR^2\). Thus, the radius of gyration \(K_s\) is:
\(K_s = \sqrt{\frac{\frac{2}{5}MR^2}{M}} = \sqrt{\frac{2}{5}R^2} = \frac{R}{\sqrt{5}}\).
3. Thin hollow sphere: For a thin hollow sphere, the moment of inertia about its axis is \(I_h = \frac{2}{3}MR^2\). Thus, the radius of gyration \(K_h\) is:
\(K_h = \sqrt{\frac{\frac{2}{3}MR^2}{M}} = \sqrt{\frac{2}{3}R^2} = \frac{R}{\sqrt{3}}\).
4. Ratio: The ratio of the radii of gyration of the solid sphere to the hollow sphere is given by:
\(\frac{K_s}{K_h} = \frac{\frac{R}{\sqrt{5}}}{\frac{R}{\sqrt{3}}} = \frac{\sqrt{3}}{\sqrt{5}}\).
Simplifying, we multiply both numerator and denominator by \(\sqrt{15}\) to get:
\(\frac{\sqrt{3}}{\sqrt{5}} \times \frac{\sqrt{15}}{\sqrt{15}} = \frac{3}{5}\).
The ratio is therefore 3:5, which matches the given correct option.
A constant voltage of 50 V is maintained between the points A and B of the circuit shown in the figure. The current through the branch CD of the circuit is :
AB is a part of an electrical circuit (see figure). The potential difference \(V_A - V_B\), at the instant when current \(i = 2\) A and is increasing at a rate of 1 amp/second is:
A full wave rectifier circuit with diodes (\(D_1\)) and (\(D_2\)) is shown in the figure. If input supply voltage \(V_{in} = 220 \sin(100 \pi t)\) volt, then at \(t = 15\) msec: 
A constant voltage of 50 V is maintained between the points A and B of the circuit shown in the figure. The current through the branch CD of the circuit is :
Which of the following statements are true?
A. Unlike Ga that has a very high melting point, Cs has a very low melting point.
B. On Pauling scale, the electronegativity values of N and C are not the same.
C. $Ar, K^{+}, Cl^{–}, Ca^{2+} and S^{2–}$ are all isoelectronic species.
D. The correct order of the first ionization enthalpies of Na, Mg, Al, and Si is Si $>$ Al $>$ Mg $>$ Na.
E. The atomic radius of Cs is greater than that of Li and Rb.
Choose the correct answer from the options given below:
AB is a part of an electrical circuit (see figure). The potential difference \(V_A - V_B\), at the instant when current \(i = 2\) A and is increasing at a rate of 1 amp/second is:
Moment of inertia is defined as the quantity expressed by the body resisting angular acceleration which is the sum of the product of the mass of every particle with its square of a distance from the axis of rotation.
In general form, the moment of inertia can be expressed as,
I = m × r²
Where,
I = Moment of inertia.
m = sum of the product of the mass.
r = distance from the axis of the rotation.
M¹ L² T° is the dimensional formula of the moment of inertia.
The equation for moment of inertia is given by,
I = I = ∑mi ri²
To calculate the moment of inertia, we use two important theorems-