Comprehension
Read the excerpt from a Handicrafts Manual: ‘Advanced Knitting Techniques’ and answer the following questions by choosing the most appropriate answer.
THE FAIR ISLE METHOD: Fair Isle knitting is a traditional technique that involves using two or more colours of yarn in a single row to create intricate patterns and designs. This method requires careful tension management to ensure even stitches and prevent puckering. To begin, select your colours and cast on the desired number of stitches. As you knit, alternate between colours every few stitches, carrying the unused yarn along the back of the work. Mastering the Fair Isle technique allows you to create stunning visual effects in garments, accessories, and home textiles.
THE CONTINENTAL STYLE: The Continental knitting style, often referred to as “picking,” involves holding the yarn in the left hand while the right hand manipulates the needles. This method allows for greater speed and efficiency, particularly when working with complex patterns or multiple colours. To practice this style, start by casting on your stitches and using your left hand to tension the yarn. With each stitch, simply “pick” the yarn with your right needle, forming a quick and fluid motion. As you become comfortable with this technique, you may find that your overall knitting speed and comfort improve significantly.
THE SHORT-ROW TECHNIQUE: Short-row knitting is an advanced technique that allows for the creation of shaped garments, such as sleeves and shoulders, without the need for complex shaping. To make a sleeve using this technique, begin by casting on the required number of stitches. Work a portion of the row, then turn your work and return without completing the full row to create the “short rows” that shape the curves of the sleeve. To prevent holes at the turn, wrap the stitch before you turn your work. Repeat this process as needed to achieve the desired shaping and dimension of the sleeve. Once you have shaped the sleeve, you can then sew the side seams to connect the pieces of your garment and finally, complete the edges to ensure a clean finish. This method not only helps shape curves but also adds dimension to your piece, allowing you to enhance fit and style.
THE FAIR ISLE METHOD: Fair Isle knitting is a traditional technique that involves using two or more colours of yarn in a single row to create intricate patterns and designs. This method requires careful tension management to ensure even stitches and prevent puckering. To begin, select your colours and cast on the desired number of stitches. As you knit, alternate between colours every few stitches, carrying the unused yarn along the back of the work. Mastering the Fair Isle technique allows you to create stunning visual effects in garments, accessories, and home textiles.
THE CONTINENTAL STYLE: The Continental knitting style, often referred to as “picking,” involves holding the yarn in the left hand while the right hand manipulates the needles. This method allows for greater speed and efficiency, particularly when working with complex patterns or multiple colours. To practice this style, start by casting on your stitches and using your left hand to tension the yarn. With each stitch, simply “pick” the yarn with your right needle, forming a quick and fluid motion. As you become comfortable with this technique, you may find that your overall knitting speed and comfort improve significantly.
THE SHORT-ROW TECHNIQUE: Short-row knitting is an advanced technique that allows for the creation of shaped garments, such as sleeves and shoulders, without the need for complex shaping. To make a sleeve using this technique, begin by casting on the required number of stitches. Work a portion of the row, then turn your work and return without completing the full row to create the “short rows” that shape the curves of the sleeve. To prevent holes at the turn, wrap the stitch before you turn your work. Repeat this process as needed to achieve the desired shaping and dimension of the sleeve. Once you have shaped the sleeve, you can then sew the side seams to connect the pieces of your garment and finally, complete the edges to ensure a clean finish. This method not only helps shape curves but also adds dimension to your piece, allowing you to enhance fit and style.
Question: 1
Ensuring ‘even stitches and prevent puckering’ refers to the
Ensuring ‘even stitches and prevent puckering’ refers to the
Updated On: Dec 10, 2024
- Tension management
- Colour selection
- Yarn thickness
- Stitch pattern
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
The emphasis on ‘even stitches and prevent puckering’ refers to controlling tension to ensure consistent stitches and avoid uneven fabric.
Thus, the correct answer is Option (A).
Thus, the correct answer is Option (A).
Was this answer helpful?
0
0
Question: 2
What is the correct order of stitching steps to make a sleeve using the short-row technique?
What is the correct order of stitching steps to make a sleeve using the short-row technique?
Updated On: Dec 10, 2024
- Cast on stitches, create short rows, sew side seams, finish edges
- Create short rows, cast on stitches, sew side seams, finish edges
- Sew side seams, cast on stitches, create short rows, finish edges
- Cast on stitches, sew side seams, finish edges, create short rows
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
The correct process for making a sleeve involves casting on stitches first, followed by creating short rows, sewing side seams, and finally finishing edges.
Thus, the correct answer is Option (A).
Thus, the correct answer is Option (A).
Was this answer helpful?
0
0
Question: 3
What is the primary focus of the Fair Isle method?
What is the primary focus of the Fair Isle method?
Updated On: Dec 10, 2024
- Creating seamless garments
- Using multiple colours for intricate patterns
- Speed and dexterity in knitting
- Shaping complex garments using coloured yarns
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
The Fair Isle method focuses on using multiple yarn colours in a single row to create detailed, visually appealing patterns.
Thus, the correct answer is Option (B).
Thus, the correct answer is Option (B).
Was this answer helpful?
0
0
Question: 4
What does the emphasis on wrapping the stitch before turning suggest about the short-row technique?
What does the emphasis on wrapping the stitch before turning suggest about the short-row technique?
Updated On: Dec 10, 2024
- It is a complicated method that requires extensive practice
- It is only relevant for advanced knitters
- Proper execution is crucial to ensure a polished finish
- It is optional and can be skipped for faster results
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
The wrapping technique is important to ensure smooth transitions and a professional finish in the short-row method.
Thus, the correct answer is Option (C).
Thus, the correct answer is Option (C).
Was this answer helpful?
0
0
Question: 5
Based on the description of the Continental style, which of the following can be inferred about its efficiency?
Based on the description of the Continental style, which of the following can be inferred about its efficiency?
Updated On: Dec 10, 2024
- It is slower than other knitting methods
- It is best suited for complex patterns only
- It requires more yarn than traditional methods
- It enables quicker advancement in design
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
The Continental style is known for allowing quicker movements, which enhances the knitter’s speed and efficiency, especially in design development.
Thus, the correct answer is Option (D).
Thus, the correct answer is Option (D).
Was this answer helpful?
0
0
Question: 6
Considering the techniques discussed, what might be inferred about the overall skill level required for mastering Fair Isle and Continental knitting?
Considering the techniques discussed, what might be inferred about the overall skill level required for mastering Fair Isle and Continental knitting?
Updated On: Dec 10, 2024
- Both techniques can be mastered without any prior experience
- Advanced techniques require a strong foundation in basic knitting skills
- They are accessible only to expert knitters with years of experience
- No specific skills are necessary for these techniques
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
Both Fair Isle and Continental techniques require a solid understanding of basic knitting skills before moving on to these advanced methods.
Thus, the correct answer is Option (B).
Thus, the correct answer is Option (B).
Was this answer helpful?
0
0
Question: 7
Which option includes the most appropriate meaning of the underlined phrase in the given sentence? “With each stitch, simply pick the yarn with your right needle, forming a quick and fluid motion.”
Which option includes the most appropriate meaning of the underlined phrase in the given sentence? “With each stitch, simply pick the yarn with your right needle, forming a quick and fluid motion.”
Updated On: Dec 10, 2024
- Grasp the yarn firmly
- Lift the yarn easily
- Catch the yarn smoothly
- Pull the yarn tightly
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
The phrase “pick the yarn” refers to catching the yarn smoothly with the needle in a fluid motion.
Thus, the correct answer is Option (C).
Thus, the correct answer is Option (C).
Was this answer helpful?
0
0
Question: 8
What can be inferred about the relationship between mastering advanced knitting techniques and a knitter’s design capabilities?
What can be inferred about the relationship between mastering advanced knitting techniques and a knitter’s design capabilities?
Updated On: Dec 10, 2024
- Mastering advanced techniques limits a knitter’s creativity to specific patterns
- Advanced techniques enhance a knitter’s ability to create innovative and varied designs
- Mastery of these techniques is irrelevant to design capabilities
- A knitter can achieve the same results using only basic techniques
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
Mastering advanced techniques opens up more creative possibilities and allows for more complex and varied design options.
Thus, the correct answer is Option (B).
Thus, the correct answer is Option (B).
Was this answer helpful?
0
0
Question: 9
How might the integration of both the Fair Isle method and the short-row technique influence a knitter’s approach to garment construction?
How might the integration of both the Fair Isle method and the short-row technique influence a knitter’s approach to garment construction?
Updated On: Dec 10, 2024
- It streamlines the process, making it easier for all skill levels to create garments
- It fosters creativity through intricate designs, needing advanced skills to execute
- It restricts the knitter to simple patterns, limiting creative possibilities
- It minimizes the need for precision, allowing for a more relaxed approach to knitting
Hide Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
The combination of the Fair Isle and short-row techniques offers a wide array of intricate designs, requiring advanced skills for successful execution.
Thus, the correct answer is Option (B).
Thus, the correct answer is Option (B).
Was this answer helpful?
0
0
Top Questions on Reading Comprehension
- Read the following passage and answer the following questions by choosing the most appropriate answer.
The Story of Coffee
Coffee, a beloved beverage enjoyed by millions around the globe, has a rich and captivating history that spans centuries. The story of coffee begins in the ancient highlands of Ethiopia, where, according to legend, a goat herder named Kaldi discovered the stimulating effects of coffee beans. One day, Kaldi noticed his goats frolicking with unusual energy after eating red berries from a certain tree. Curious, he tried the berries himself and experienced a newfound alertness. This discovery soon spread to monasteries, where monks used it to stay awake during long hours of prayer. From Ethiopia, coffee cultivation and consumption spread to the Arabian Peninsula, particularly in Yemen, where the practice of roasting coffee beans and brewing the drink began to take shape. By the 15th century, coffee had become a popular beverage in the Islamic world, with coffee houses known as ‘qahveh khaneh’ emerging as social hubs for conversation, music, and intellectual exchange. These coffee houses became centers of culture and commerce, influencing the spread of coffee to Turkey and beyond, eventually reaching Europe. In Europe, coffee initially faced resistance from religious authorities who considered it a ‘Muslim drink’ and tried to ban it. However, its popularity persisted, and by the 17th century, coffee houses had sprung up in major European cities, becoming important gathering places for artists, writers, and thinkers. The stimulating effects of coffee were embraced during the Age of Enlightenment, where it was seen as a catalyst for intellectual discussion and innovation. The journey of coffee continued with the establishment of colonial plantations in tropical regions such as the Caribbean, Central and South America, and Southeast Asia. These plantations fuelled the global demand for coffee, transforming it from a regional specialty to a major commodity. The industrial revolution further accelerated coffee production and consumption, leading to innovations in coffee brewing methods and the development of instant coffee. In the modern era, coffee has evolved into a deeply ingrained part of daily life for people worldwide. Its cultural significance spans from the bustling cafes of Paris to the quiet coffee farms of Colombia. Today, coffee remains not only a popular beverage but also a symbol of social interaction, productivity, and enjoyment. Whether sipped slowly over a conversation with friends or grabbed hastily on the way to work, the story of coffee continues to unfold, intertwining with the histories and cultures of countless societies across the globe.- AILET BALLB (Hons.) - 2025
- English
- Reading Comprehension
- Read the following passage and answer the following questions by choosing the most appropriate answer.
The intricate world of modern manufacturing is a web of precision and innovation, where even the tiniest components play a pivotal role. One such element, often overlooked but crucial, is the sub-subpart. Whether it’s a carpenter fashioning a bespoke piece of furniture or an automobile engineer designing the next generation of vehicles, the creation of sub-subparts is a fundamental process that demands meticulous craftsmanship and cutting-edge technology. In the realm of woodworking, carpenters frequently work with sub-subparts like dowels, screws, and hinges. These minute components may appear insignificant, yet they determine the structural integrity and functionality of the final product. Crafting a dowel, for instance, begins with selecting the appropriate wood species, followed by precision cutting and shaping. The result is a perfectly cylindrical, sturdy sub-subpart that seamlessly joins two larger pieces of wood. The advent of computer-aided design (CAD) and computer numerical control (CNC) machines has revolutionised this process, enabling carpenters to create sub-subparts with unparalleled precision.
Similarly, in the automobile industry, sub-subparts are the unsung heroes of vehicle construction. Take, for instance, the ball bearing—a minuscule but essential component in the wheels and transmission system. Manufacturing these precision-engineered spheres involves intricate processes like forging, heat treatment, and precision machining. Modern techniques such as laser cutting and 3D printing have streamlined production, ensuring that these sub-subparts meet the demanding standards of the automotive sector. The manufacturing of sub-subparts is a testament to the convergence of traditional craftsmanship and cutting-edge technology. Whether it’s a carpenter’s workshop or a high-tech automotive assembly line, the quest for perfection in sub-subpart creation remains unwavering. The attention to detail and precision required in these processes is a testament to the dedication of craftsmen and engineers alike.
To conclude, while sub-subparts may be small in size, their significance in various industries cannot be overstated. Whether it’s a carpenter working on a timeless piece of furniture or an automotive engineer striving for superior performance, the manufacturing of sub-subparts is a crucial step towards achieving excellence in craftsmanship and technology. This fusion of tradition and innovation accentuates the essence of modern manufacturing.- AILET BALLB (Hons.) - 2025
- English
- Reading Comprehension
- Read the book descriptions for three different books and answer the questions by choosing the most appropriate options.
\(\text{The Politics of Change}\) \(\text{The Change in Politics}\) \(\text{Politics and Change:}\) A Global Perspective} In "The Politics of Change," political analyst Dr. Emily Harper examines the dynamics of social movements and their impact on policy reform. Through detailed case studies, she explores how grassroots organizations, protests, and advocacy campaigns shape public opinion and influence lawmakers. Dr. Harper provides insights into the strategies that successful movements employ and discusses the challenges they face in a complex political landscape. She discusses key strategies, such as coalition-building, media engagement, and the use of digital platforms to amplify voices. This book by veteran journalist Mark Stevens investigates the shifting political landscape in the 21st century. Focusing on major elections, emerging political parties, and the role of social media, Stevens analyzes how technology and demographics are transforming political engagement and voter behaviour. Through interviews with political leaders, campaign strategists, and everyday voters, Stevens uncovers how demographic shifts and technological advancements are reshaping political discourse in urban areas. He analyzes the implications of these changes for traditional political institutions and explores how movements like #MeToo and Black Lives Matter have disrupted conventional narratives. In this insightful work, international relations scholar Dr. Anika Patel presents a global analysis of political change across various regions. She explores the factors that drive political transitions, including economic shifts, cultural movements, and international influences. Dr. Patel emphasizes the interconnectedness of global politics and how local changes can have far-reaching implications. She analyzes various factors driving political transitions, including economic upheaval, cultural shifts, and the impact of globalization. She provides case studies from diverse regions, such as the Arab Spring, democratic movements in Latin America, and shifts in power in Asia. The book serves as a vital resource for understanding the complexities of political evolution in a rapidly changing world. - AILET BALLB (Hons.) - 2025
- English
- Reading Comprehension
- The levels of dissolved oxygen in the world's ocean waters are declining precipitously. Just like humans, fish need oxygen to survive, and so in ocean areas experiencing significant levels of oxygen scarcity, or hypoxia, fish populations are plummeting. Although some hypoxic areas, called "dead zones," occur naturally, hypoxia in coastal areas and inland waters is caused mainly by agricultural run-off and by discharge of industrial wastewater. More than one hundred permanent dead zones, many covering thousands of square miles, exist worldwide today.
Since reproductive success is the most critical factor in the sustainability of any species, the extent of this threat to marine life and genetic diversity can hardly be overstated. After several months in hypoxic waters, female fish produce fewer eggs. Moreover, hypoxic conditions serve to alter the normal ratio between two particular hormones manufactured during the embryonic stage when a fish's gender is determined. During gestation and under these conditions, the mother produces more testosterone (and less estradiol), which inhibits the development of female reproductive organs and other female characteristics in the embryo, while promoting the development of male traits.
The implications of declining oxygen levels extend beyond individual species to entire ecosystems. Marine biodiversity is at risk as species that cannot adapt to hypoxic conditions may face extinction, leading to a cascade of effects throughout the food web. Predators may struggle to find adequate prey, while other marine organisms, such as coral reefs, which rely on healthy fish populations for symbiotic relationships, may also deteriorate. The loss of biodiversity can disrupt ecosystem services that are essential for human communities, including fisheries, tourism, and coastal protection.- AILET BALLB (Hons.) - 2025
- English
- Reading Comprehension
- Read the given extract and answer the following questions by choosing the most appropriate answer.
The rise of renewable energy sources has become a crucial topic in the global fight against climate change. Solar and wind power, in particular, have gained traction due to their ability to provide clean energy while reducing dependence on fossil fuels. Governments worldwide are investing in technology to enhance energy efficiency and storage solutions, aiming to create a more sustainable energy landscape.
As the costs of renewable technologies continue to decrease, the transition from traditional energy sources is becoming not only environmentally necessary but also economically viable. However, this transition faces several challenges. The intermittent nature of renewable energy sources, such as solar and wind, requires advancements in energy storage to ensure a reliable supply. Additionally, existing infrastructure often relies heavily on fossil fuels, necessitating significant investment to upgrade or replace systems. Policy makers must navigate these complexities, balancing environmental goals with economic realities. The future of energy will likely depend on collaboration between governments, industries, and consumers to foster innovation and implement sustainable practices.- AILET BALLB (Hons.) - 2025
- English
- Reading Comprehension
View More Questions
Questions Asked in AILET exam
- Issue: Is football the most popular sport in the world?
Argument 1: Yes, Football World Cup (FIFA) have over five times global viewership as compared to Formula 1 Grand Prix (Car racing) or the Wimbledon Championships (Tennis).
Argument 2: Yes, Lionel Messi is the most followed footballer across social media platforms.
Argument 3: No, the Cricket World Cup has been the most profitable sports event worldwide for the last three decades.
Choose the most appropriate answer:- AILET BALLB (Hons.) - 2025
- Statements and Arguments
- Vinay is trying to decide the sequence in which to watch the following movies –Sholay (SH), RRR, Slumdog Millionaire (SM), PK and Dangal (DL). The sequence must adhere to the following conditions:
I. SH and DL must not immediately precede or follow each other.
II. RRR must go after SM.
III. PK cannot be the first or the last movie.
IV. DL must necessarily be one removed from SM.
Which of the following is a valid sequence? - Sanjana is attempting to create an exercise plan for a 5-day week. She has decided on the following exercises – A, X, B, Y, C, in accordance with the following conditions.
I. A and Y cannot be on the consecutive days
II. C must always be followed by B
III. B and A cannot be done on alternate days
IV. X cannot be done on the first day of the week
V. No exercise can be repeated in the week
Which of the following is a valid plan? - Assertion: The rise of OTT platforms is challenging the traditional movie theatre business.
Argument 1: OTT platforms and traditional movie theatre present completely different experience and therefore are unlikely to affect each other.
Argument 2: OTT platforms ensure instant availability of diverse content, which a traditional movie theatre cannot emulate.
Choose the most appropriate answer:- AILET BALLB (Hons.) - 2025
- Statements and Arguments
- All Rabbits are Sleepers. All Tortoise paints. Some Rabbits are Tortoise. Siri is a Rabbit. Examine the following statements:
I. Siri paints
II. Siri does not paint
III. Siri is a Sleeper
IV. Siri is not a Sleeper
V. Siri is a Tortoise
VI. Siri is not a Tortoise
Choose the most appropriate answer:
View More Questions