Select Goal &
City
Select Goal
Explore
Question:
Identify the correct statements regarding Isometric Scale.
A) True scale is marked on horizontal base line.
B) Isometric scale is marked on a line inclined at 45° with horizontal base line
C) Isometric scale is used to draw isometric view.
D) Isometric scale can measure the length of isometric lines
E) Isometric scale cannot measure the length of non-isometric lines.
Choose the correct answer from the options given below:
Identify the correct statements regarding Isometric Scale.
A) True scale is marked on horizontal base line.
B) Isometric scale is marked on a line inclined at 45° with horizontal base line
C) Isometric scale is used to draw isometric view.
D) Isometric scale can measure the length of isometric lines
E) Isometric scale cannot measure the length of non-isometric lines.
Choose the correct answer from the options given below:
A) True scale is marked on horizontal base line.
B) Isometric scale is marked on a line inclined at 45° with horizontal base line
C) Isometric scale is used to draw isometric view.
D) Isometric scale can measure the length of isometric lines
E) Isometric scale cannot measure the length of non-isometric lines.
Choose the correct answer from the options given below:
Updated On: Sep 16, 2024
- D and E only
- A and B only
- B and D only
- A and E only
Hide Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
The correct option is (A): D and E only
Was this answer helpful?
0
0
Top Questions on Isometric Projection
- _____ is used for drawing isometric projection.
- CUET (UG) - 2023
- Informatics Practices
- Isometric Projection
- Choose the correct statement for the given figure:
- CUET (UG) - 2023
- Engineering Graphics
- Isometric Projection
- Match List - I with List- II.
List - I (Dimension in Isometric Projection) List - II (Isometric length)(Approx) (A) Long edge of the prism (I) 16 mm (B) Short edge of the prism (II) 32 mm (C) Radius of Cylinder (III) 64 mm (D) Diameter of Cylinder (IV) 20 mm 
Choose the correct answer from the options given below:- CUET (UG) - 2023
- Engineering Graphics
- Isometric Projection
- The isometric scale is used for measurement of _______
- CUET (UG) - 2023
- Engineering Graphics
- Isometric Projection
- The isometric projection of different solids is drawn by keeping the three principle axes at ____________ to each other.
- CUET (UG) - 2023
- Engineering Graphics
- Isometric Projection
View More Questions
Questions Asked in CUET exam
- A molecule X associates in a given solvent as per the following equation:
X ⇌ (X)n
For a given concentration of X, the van’t Hoff factor was found to be 0.80 and the
fraction of associated molecules was 0.3. The correct value of ‘n’ is:- CUET (UG) - 2024
- Solutions
- If \(A = \begin{bmatrix} 3 & 2 \\ -1 & 1 \end{bmatrix} \quad \text{and} \quad B = \begin{bmatrix} -1 & 0 \\ 2 & 5 \\ 3 & 4 \end{bmatrix},\)then \((BA)^T\) is equal to:
- CUET (UG) - 2024
- Matrices
- Subject to constraints: 2x + 4y ≤ 8, 3x + y ≤ 6, x + y ≤ 4, x, y ≥ 0; The maximum value of Z = 3x + 15y is:
- CUET (UG) - 2024
- Maxima and Minima
- If \( A = \begin{bmatrix} K & 4 \\ 4 & K \end{bmatrix} \) and \( |A^3| = 729 \), then the value of \( K^8 \) is:
- CUET (UG) - 2024
- Matrices
- A company produces 'x' units of geometry boxes in a day. If the raw material of one geometry box costs ₹2 more than the square of the number of boxes produced in a day, the cost of transportation is half the number of boxes produced in a day, and the cost incurred on storage is ₹150 per day. The marginal cost (in ₹) when 70 geometry boxes are produced in a day is:
- CUET (UG) - 2024
- Profit and Loss
View More Questions
SUBSCRIBE TO OUR NEWS LETTER
COLLEGE NOTIFICATIONSEXAM NOTIFICATIONSNEWS UPDATES
Download the Collegedunia app on 
© 2024 Collegedunia Web Pvt. Ltd. All Rights Reserved