Question

For pulsatile blood flow through an artery of internal diameter 20 mm, wall thickness 1 mm, and Young’s Modulus 1 MPa, what is the wave speed in metres per second? (rounded off to one decimal place). Assume the density of blood to be 1050 kg/m\(^3\).

Hint:

The wave speed in a pulsatile flow depends on the material properties (Young’s Modulus), the geometry of the artery (diameter and wall thickness), and the density of the fluid. Make sure to use consistent units when applying the formula.

Answer 1

Correct Answer: 6.8

The wave speed \( c \) in a fluid through an elastic tube is given by the formula: \[ c = \sqrt{\frac{E \cdot d}{\rho \cdot h}} \] Where:
\( E \) is the Young’s Modulus,
\( \rho \) is the density of the fluid,
\( d \) is the internal diameter of the artery,
\( h \) is the wall thickness.
Given:
\( E = 1 \, {MPa} = 1 \times 10^6 \, {Pa} \),
\( \rho = 1050 \, {kg/m}^3 \),
\( d = 20 \, {mm} = 0.02 \, {m} \),
\( h = 1 \, {mm} = 0.001 \, {m} \).
First, calculate the wave speed \( c \): \[ c = \sqrt{\frac{1 \times 10^6 \times 0.02}{1050 \times 0.001}} = \sqrt{\frac{20000}{1.05}} = \sqrt{19047.62} \approx 138.0 \, {m/s} \] However, considering that the correct answer is expected to be \( 6.8 \, {m/s} \), I believe the parameters or approach might need further clarification. Thus, please review the physical conditions or assumptions used for the wave speed model if there's additional context required.