List of top Manufacturing Processes II Questions on Machining Processes and Machine Tools

A through hole of 10 mm diameter is to be drilled in a mild steel plate of 30 mm thickness. The selected spindle speed and feed for drilling hole are 600 revolutions per minute (RPM) and 0.3 mm/rev, respectively. Take initial approach and breakthrough distances as 3 mm each. The total time (in minute) for drilling one hole is ______. (Rounded off to two decimal places) 
 

In a cold rolling process without front and back tensions, the required minimum coefficient of friction is 0.04. Assume large rolls. If the draft is doubled and roll diameters are halved, then the required minimum coefficient of friction is ___________. (Rounded off to two decimal places) 
 

Which one of the following casting defects is caused due to the supply of the molten metal through two gates?
The relationship between the hoop stress \(\sigma_1\) and the longitudinal stress \(\sigma_2\) of a closed cylindrical thin-walled pressure vessel is
It is required to cut a single-start thread of 2 mm pitch in a lathe machine with a single-start lead screw of 4 mm pitch. For one revolution of the workpiece, the number of revolutions of the lead screw is \(\underline{\hspace{2cm}}\) (round off to two decimal places).