List of top Building Construction and Structural systems Questions asked in GATE Architecture and Planning

For the beam shown below, ignoring the self-weight, the maximum hogging moment (in kN·m) generated for the loads indicated is _______ (rounded off to one decimal place).

Polytetrafluroethylene (PTFE) coated fiberglass has been used as a roofing membrane in

Which of the following statements is/are correct?

Match the specially shaped bricks in Group-I with their corresponding nomenclature in Group–II

Group I	Group II
(P)	(1) Plinth Header
(Q)	(2) Bird's mouth
(R)	(3) Squint
(S)	(4) Double cant
	(5) Plinth stretcher

A 5 m long Aluminium tie rod of cross-section 0.20 m × 0.04 m is subjected to a tensile force induced by its self-weight of 21.20 kg/m considering gravitational acceleration of 10 \(m/s^2\). If tensile Young's modulus of Aluminium is 70,000 MPa, the maximum tensile strain in the rod is______   \(\times \,10^{-6}\) (rounded off to two decimal places).

The following Figure shows the excavation plan of a two room structure, where the trench has a uniform width of 1.10 meters. If the cumulative centre line length of the trench is 41.10 meters and the required depth of concrete to be poured is 0.30 meters, the volume of concrete in foundation, in cubic meters, will be _______(rounded off to two decimal places).