List of top Biomedical Engineering Questions on Control Systems

Among the following, which signal is aperiodic?
A first-order system has transfer function $H(s) = \frac{1}{(s+2)}$. Its impulse response is:}
If ROC of a Laplace transform is $\text{Re}(s) > -2$, then the system is:}
Linear phase is easily achievable in:
Circular convolution occurs due to:
In Maxwell's capacitance bridge for calculating unknown inductance, the various values at balance are \( R_2 = 300 \, \Omega \), \( R_3 = 700 \, \Omega \), \( R_4 = 1500 \, \Omega \), \( C_4 = 0.8 \, \mu\text{F} \). Calculate \( R_1 \), \( L_1 \), and Q factor, if the frequency is 1100 Hz.
In a Q Meter, the values of the tuning capacitor are \( C_3 \) and \( C_4 \) for resonant frequencies \( f \) and \( 2f \), respectively. The value of distributed capacitance is
A Daniel cell is balanced at 240 cm in length of a potentiometer. Now the cell is short-circuited by a resistance of 0.25 ohm and the balance is obtained at 80 cm. The internal resistance of the Daniel cell is
Starting position of an object is represented as \( x = 5.1 \pm 0.2 \text{ m} \) and the finishing position as \( y = 6.9 \pm 0.3 \text{ m} \). What will be the displacement and error in displacement?
Systematic errors lead due to a lack of
Use Mason’s gain formula to find the transfer function of the given figure 
Mason’s gain formula to find the transfer function
The transfer function of the system is \( G(s) = \frac{100}{(s + 1)(s + 100)} \). For a unit step input, the approximate settling time for the 2 percent criterion is
The range of \( K \) for the stability of the system is \( 0<K<100 \). For \( K = 10 \), the gain margin of the system is
A Bode magnitude plot for the transfer function \( G(s) \) of a plant is shown below. Which one of the following transfer functions best describes the plant? 
A Bode magnitude plot for the transfer function G(s)