List of top Biomedical Engineering Questions on Analog and Digital Electronics

What type of register would shift a complete binary number in one bit at a time and shift all the stored bits out one bit at a time?
Sample and hold circuits in A/D converters are designed to
What is the maximum possible range of bit-count specifically in an n-bit binary counter consisting of 'n' number of flip-flops?
Which of the following is a function of shift register?
Multivibrator which can produce a very short pulse or a much longer rectangular shaped waveform whose leading edge rises in time with an externally applied trigger pulse is called
How many AND gates are required to realize Y = CD + EF + G
An instrumentation amplifier has a high
The bandwidth of an RF tuned amplifier is dependent on Q-factor of
In FET, as \( V_{GS} \) is changed from zero to increasing reverse bias, the value of \( g_m \) is
A shunt regulator utilizing a zener diode with an incremental resistance of \(5\,\Omega\) is fed through an \(82\,\Omega\) resistor. If the raw supply changes by \(1.0\,\text{V}\), what is the corresponding change in the regulated output voltage?
Slew rate of an ideal op-amp is
The external interrupts of 8051 microcontroller are
A 4-bit R/2R digital-to-analog (DAC) converter has a reference of 5 V. What is the analog output for the input code 0101?
Determine the output frequency of a frequency division circuit which contains 12 flip-flops with an input clock frequency of 20.48 MHz.
An amplifier has an open loop voltage gain of -500. This gain is reduced to -100 when negative feedback is applied. The reverse transmission factor, \( \beta \), of the system is
An 8 bit successive approximation Analog to Digital Converter (ADC) has a clock frequency of 1 MHz. Assume that the start conversion and end conversion signals occupy one clock cycle each. Among the following options, what is the maximum frequency that this ADC can sample without aliasing?