List of top Mechanical Engineering Questions on Manufacturing Processes asked in Andhra Pradesh Post Graduate Engineering Common Entrance Test

Group technology brings together and organizes:
Which material is commonly used for pattern making?
In metal cutting operations, discontinuous chips are produced while machining:
In wire drawing operation, the maximum reduction per pass for perfectly plastic material in ideal condition is:
CAD/CAM is hardware oriented, but gives it life.
Brazing differs from soldering primarily in the following:
Cores are used to:
In drawing operation, the metal flows due to:
Which of the following casting process uses an expendable pattern?
The required diameter of the blank for the deep drawing of a cup of diameter $d$ and height $h$ is given by:
Investment casting uses pattern made of:
In hot working:
Which of the following processes is used for shaping metal by pressing it into a mold under high pressure?
In a turning operation, the cutting speed is 120 m/min, and the diameter of the workpiece is 50 mm. What is the spindle speed in RPM?

A steel workpiece is to be milled. Metal removal rate is 30 cm3/min. Depth of cut is 5 mm and width of cut is 100 mm. The rate of feed in mm/min is}

In Computer Aided Quality Control (CAQC), the coordinate measuring machine
In a CNC program block, N130 G02 X65.0 Y60.0 R40.0 F250, G02 refers to
A grinding wheel is specified by ``C24K7V'' for finish grinding of a tool. The first letter ``C'' is represented by
The machining operation used to enlarge an existing hole is termed as:
The mechanism of material removal in electric discharge machining process is
The non-traditional process that utilizes thermoelectric energy for removing material is
Select the correct statement from the following.
The cutting tool moves in a vertical reciprocating motion in which of the following machine tool?
In an orthogonal cutting, rake angle (\( \alpha \)) of the tool is 25° and friction angle (\( \lambda \)) is 27°. Using Merchant's shear angle relationship, the value of shear angle (\( \phi \)) is:
In a single point turning operation of steel with a tool, Taylor’s tool life exponent is 0.2. What is the increase in the tool life if the cutting speed is halved?