List of top Mechanical Engineering Questions on Casting, Forming and Joining Processes asked in TS PGECET

The welding process used for joining railway tracks is
What is the key requirement for an adhesive to properly bond to a surface?
The welding process used for joining railway tracks is
What is the key requirement for an adhesive to properly bond to a surface?
While designing the gating system, the ratio of 1 : 2 : 4 represents:
The extrusion process used to manufacture the short length components like paste tubes, gun shells etc., is
In casting process, the covering passage is used for feeding the liquid metal into the mould to
The commonly used casting process for producing intricate and detailed sculptures is:
The phenomenon where a metal part tends to partially return to its original shape after the forming tool is removed is known as
In MIG welding process, the commonly used gases for shielding are
The welding process used for joining railway tracks is
A low projection on the drag surface of a casting commencing near the gate by erosion of sand due to the high velocity liquid metal in the bottom gating. This defect is known as:
The shrinkage allowance has been provided on the pattern to compensate the shrinkage when:
Which type of metal forming process is used to make utensils and cup shaped products?
The cutting tool manufactured by powder metallurgy is
The high alloy steel components are preheated before welding for reducing
The joint configuration best suited for adhesive bonding is