List of top Textile Engineering and Fibre Science Questions on Fabric Engineering asked in TANCET

A reed has 15 dents/cm, and the warp is drawn in two ends per dent. If the finished fabric is 1.4 m wide compared with 1.47 m wide in the reed, what is the finished fabric sett?
Among the following systems of drafting, the objective of which is to reduce the friction between adjacent warp ends?
The contraction percentage of 1 x 1 rib structure compared to its machine width is around
What will be the loop length of the knitted fabric having course length 60 cm and wale length 80 cm and number of loops per course 40?
What will be the tightness factor of the plain single jersey knitted with 64 tex yarn and 1.5 cm loop length?
In Rib Knitting machine, the Knittable yarn count in 'Ne' is calculated by
In Weft knitting machine, the term 'Robbing back' is
Which of the following Thermal techniques utilizes the mechanical hammering for conversion of vibration energy to heat energy for bonding the fibrous web?
Which of the following fibers can be used for manufacturing of absorbent core based nonwoven products?
In which of the following web laying techniques, high loft structures can be produced?
The temperature of the air in melt blown process is set close to ________ of the polymer.
For spreading knitted and other stretch fabric the spreading device should include