List of top Textile Engineering and Fibre Science Questions on Yarn Engineering asked in TANCET

Which one of the following spinning system gives higher production rate?
Based on the principle of yarn formation, select the odd one among the following.
Two yarns of count X each are doubled and plied. The ratio of resultant count of two ply yarn expressed in tex system and Ne system is_______. Neglect contraction due to twist.
The surface speed of cylinder is
The winding tension at the ring frame will be highest during winding at
The number of fibres in the cross section of comber lap for best combing should be about
In the carding machine, the closest setting exists between
In cotton spinning, at the ring frame, the shore hardness of front top roller is normally
Select the correct match 
Core sheath yarn (i) Rotor yarn
The trash content of cotton fed to the blow room is 5%. The blow room has three machines having individual cleaning efficiency of 25%, 30%, 25% respectively. Find the trash% present in the blow room lap.
The gear A of 20 teeth meshes with gear B of 10 teeth that is compounded to wheel C of 30 teeth that meshes with gear D of 10 teeth. The velocity ratio between gear D and gear A is
The centrifugal force (N) acting on a material mass 2g present at the tip of a beater of radius 25 cm rotating at 600 rpm is
The trash removal is higher at