List of top Electrical Engineering Questions on Digital Signal Processing asked in TANCET

Surge impedance of a lossless transmission line is (if \( L \) = inductance/m and \( C \) = capacitance/m):
The breakdown strength of air for small gaps (1 mm) under uniform field condition and standard atmospheric conditions will be:
Optimum number of stages for Cockcroft-Walton voltage multiplier circuit are:
The most important test to assert the proper functions of a surge diverter is:
An R-C voltage divider has an HV arm capacitance, \( C_1 = 600 \) pF, resistance \( R = 400 \) \( \Omega \), and equivalent ground capacitance \( C_g = 240 \) pF. The effective time constant of the divider in nanoseconds is:
Electric traction uses a power supply of:
Filament lamps operate normally at a power factor of:
Candela is the unit of:
A slab of insulating material 130 cm\(^2\) in area and 1 cm thick is to be heated by dielectric heating. The power required is 380 W at 30 MHz. The material has a relative permittivity of 5 and a power factor of 0.05. Determine the necessary voltage.
Spot welding is used for:
Material used for solar cell is: