Question:

Water rises to a height of 10 cm in a capillary tube and mercury falls to a depth of 3.5 cm in the same capillary tube. If the density of mercury is 13.6 g/cc and its angle of contact is $ 135{}^\circ $ and density of water is 1 g/cc and its angle of contact is $ 0{}^\circ $ , then the ratio of surface tensions of the two liquids is: $ \left( \text{cos }135{}^\circ =0.7 \right) $

Updated On: Sep 4, 2024
  • 1:14
  • 5:34
  • 1:05
  • 5:25
Hide Solution
collegedunia
Verified By Collegedunia

The Correct Option is B

Solution and Explanation

The rise or fall of liquid in the capillary tube is given by $ h\rho g=2T\cos \theta \Rightarrow h=\frac{2T\cos \theta }{h\rho g} $ Hence, surface tension $ T=\frac{hr\rho g}{2\cos \theta } $ where r is radius of capillary Given: For watery $ {{h}_{1}}=10\,cm, $ $ {{h}_{2}}=3.5\,cm $ (for mercury) Density of watery $ {{d}_{1}}=1g/cc, $ Density of mercury $ {{d}_{2}}=13.6\,g/cc $ Angle of contact $ {{\theta }_{1}}=0 $ (for water), angle of contact $ {{\theta }_{2}}={{135}^{o}} $ ?(for mercury) In first case $ {{T}_{1}}=\frac{10\times r\times 1\times g}{2\cos \theta }=\frac{10rg}{2\cos \theta }=\frac{10rg}{2}=5rg $ ?(i) $ {{T}_{2}}=\frac{3.5\times r\times 13.6\times g}{2\cos {{135}^{o}}}=\sqrt{2}\times 3.5\times 6.8\,rg $ ?(ii) Dividing E (ii) by E (i), we get $ \frac{{{T}_{1}}}{{{T}_{2}}}=\frac{5rg}{\sqrt{2}\times 3.5\times 6.8rg}=\frac{5rg}{33.65rg}=\frac{5}{34} $
Was this answer helpful?
0
0

Concepts Used:

Surface Tension

The amount of energy required to increase the liquid's surface area by one unit area is known as surface tension. In other words, it is a property of the liquid surface to resist force.

Surface tension is defined as,

The ratio of the surface force F to the length L along which the force acts.

Mathematically, the surface tension formula can be expressed as follows:

T=F/L

Where,

  • F is the force per unit length
  • L is the length in which force act
  • T is the surface tension of the liquid

Read More: Detergents and Surface Tension

Factors affecting surface tension:

  • Impurities: The surface tension decreases with the addition of impurities.
  • Surfactants: Adding surfactants in liquids lowers the tension of water making it interrupt aside or get susceptible.
  • Temperature: The surface tension of a liquid reduces as the temperature rises.

The Unit of Surface Tension:

The SI unit of Surface Tension is Newton per Meter or N/m.