
Step 1: Understanding Resistivity in Semiconductors
The resistivity \( \rho \) of a semiconductor is given by: \[ \rho = \frac{m}{n e^2 \tau} \] where: - \( m \) is the electron mass, - \( n \) is the number density of charge carriers, - \( e \) is the charge of an electron, - \( \tau \) is the relaxation time.
Step 2: Effect of Temperature on Resistivity
In semiconductors, as temperature increases: The number density \( n \) of charge carriers increases significantly due to thermal excitation. The relaxation time \( \tau \) decreases due to increased scattering.
However, the increase in \( n \) dominates over the decrease in \( \tau \), leading to a net decrease in resistivity.
Step 3: Choosing the Correct Curve
Since resistivity decreases exponentially with increasing temperature in a semiconductor, the correct curve must show a steep downward trend. The given image confirms that Curve (b) represents this behavior. Final Answer: The correct behavior of resistivity with temperature in a semiconductor is represented by Curve (b).
Match List - I with List - II:
List - I:
(A) Electric field inside (distance \( r > 0 \) from center) of a uniformly charged spherical shell with surface charge density \( \sigma \), and radius \( R \).
(B) Electric field at distance \( r > 0 \) from a uniformly charged infinite plane sheet with surface charge density \( \sigma \).
(C) Electric field outside (distance \( r > 0 \) from center) of a uniformly charged spherical shell with surface charge density \( \sigma \), and radius \( R \).
(D) Electric field between two oppositely charged infinite plane parallel sheets with uniform surface charge density \( \sigma \).
List - II:
(I) \( \frac{\sigma}{\epsilon_0} \)
(II) \( \frac{\sigma}{2\epsilon_0} \)
(III) 0
(IV) \( \frac{\sigma}{\epsilon_0 r^2} \) Choose the correct answer from the options given below:

Space between the plates of a parallel plate capacitor of plate area 4 cm$^2$ and separation of $ d = 1.77 \, \text{mm} $, is filled with uniform dielectric materials with dielectric constants (3 and 5) as shown in figure. Another capacitor of capacitance 7.5 pF is connected in parallel with it. The effective capacitance of this combination is ____ pF.