Question:
The figure "A" here is a plan view drawing of one of the objects shown in the right. Identify the correct object whose plan view drawing is shown.
The figure "A" here is a plan view drawing of one of the objects shown in the right. Identify the correct object whose plan view drawing is shown.
Show Hint
When identifying plan views, focus on the shapes visible from above and how top surfaces align with the base.
Updated On: Jan 12, 2026
- 1
- 2
- 3
- 4
Show Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
Step 1: Interpreting the plan view.
The plan view (Figure A) shows a square base with a smaller square centered on top and sloping edges connecting them, forming an inward pyramidal shape. This indicates a structure where the top portion is smaller and aligned at the center of a larger base.
Step 2: Matching with the given objects.
- Object 1: Flat top—does not match.
- Object 2: Has a centered element but the top is cylindrical, not square—does not match.
- Object 3: Has an inverted cone/pyramid on top—this would create a different plan view (a small square *on top of a larger one* but edges taper *outwards*, not matching the inward slopes seen).
- Object 4: Has a small square top, centered, with sloping sides down to a larger square base—this exactly produces the plan view in A.
Step 3: Conclusion.
Thus, the correct object whose plan view is shown is Option (D) 4.
The plan view (Figure A) shows a square base with a smaller square centered on top and sloping edges connecting them, forming an inward pyramidal shape. This indicates a structure where the top portion is smaller and aligned at the center of a larger base.
Step 2: Matching with the given objects.
- Object 1: Flat top—does not match.
- Object 2: Has a centered element but the top is cylindrical, not square—does not match.
- Object 3: Has an inverted cone/pyramid on top—this would create a different plan view (a small square *on top of a larger one* but edges taper *outwards*, not matching the inward slopes seen).
- Object 4: Has a small square top, centered, with sloping sides down to a larger square base—this exactly produces the plan view in A.
Step 3: Conclusion.
Thus, the correct object whose plan view is shown is Option (D) 4.
Was this answer helpful?
0
0
Top CEED Design Aptitude Questions
- A bank needs to upgrade its ATM kiosks to be wheel-chair accessible. An ATM kiosk entrance has four steps rising up to reach the floor level of the kiosk. Each step is 1000 mm in length, 300 mm in breadth, and 150 mm in height. The bank proposes to create a wheel-chair accessible ramp with a slope of 1:12, adjacent to the steps. What is the minimum horizontal length of the ramp in metre? \
- A system of frictionless and massless pulleys is being used to pull up a load of 2520 N. What is the minimum force (in Newtons) required at the end of the rope (shown in dashed lines)?
- Figure shows the plan of a one-way road passing next to a primary school. Which of the options can be the location(s) to set up a bus stop for the school bus in Indian context?
- Mobile sculptures are created by tying fish-shaped cut-outs of different colours using blue strings on brown sticks of negligible weight, as shown below. All the fish cut-outs are of the same size and weight. Which of the options will remain balanced after suspending from a ceiling?
- Which of the graphs shown below represent(s) the equation XY = 25?
View More Questions
Top CEED Pattern Recognition Questions
- X1 is a 3D form generated from the shape X, using certain 3D operations. It has 14 surfaces in total. The same operations are carried out on shape Y. How many surfaces would the resulting 3D form have?
- Richa has a pencil, a compass, and a post card of size 12 cm x 7 cm. Which of the following diagrams can she draw in her notebook using only these objects?
- Identify the logo of Google Chrome.
- Which option will replace the question marks?
- Choose the correct option.
View More Questions
Top CEED Questions
- Solid 1, Solid 2 and Solid 3 are joined together to form a cuboid as shown in Figure 1. The cuboid is then painted from all the sides. How many surfaces are there without the paint when you separate all the three solids?
- An irregular solid is cut into seven pieces as shown. The pieces are neither rotated nor scaled, but are kept in a random sequence. Find the correct sequence to get the smooth form. The sequence should be written from left to right.
- What are the least number of lines required to generate a 3D form such that it creates shadows similar to the figure shown below?
- In the square ABCD, line XY is drawn parallel to the base as shown in the figure below. P and Q are any two arbitrary points on XY, forming triangles ABQ and CDP. What fraction of the area of the square is the total green shaded area?
- Five square pyramids are stacked as shown in the figure below with the bottom layer consisting of four pyramids in a 2 x 2 grid. If the bottom layer consists of pyramids in 6 x 7 grid, and they are stacked in a similar manner to its maximum height, how many pyramids will the formation contain?
View More Questions