In the given circuit, the breakdown voltage of the Zener diode is 3.0 V. What is the value of Iz ?
- 7 mA
- 1.5 mA
- 5.5 mA
- 10 mA
The Correct Option is C
Solution and Explanation
Step 1: Identify the Zener Breakdown Voltage
Given \(V_Z = 3 \, \text{V}\).
Step 2: Determine the Potentials in the Circuit
Let the potential at point \(B = 0 \, \text{V}\). The potential at \(E(V_E) = 10 \, \text{V}\). Therefore, \(V_C = V_A = 3 \, \text{V}\) across the Zener diode.
Step 3: Calculate the Total Current \(I\)
Using Ohm’s law, the total current \(I\) through the \(1 \, \text{k}\Omega\) resistor:
\[ I = \frac{10 - 3}{1000} = \frac{7}{1000} = 7 \, \text{mA} \]
Step 4: Find \(I_1\), the Current through the \(2 \, \text{k}\Omega\) Resistor
Voltage across the \(2 \, \text{k}\Omega\) resistor is \(3 \, \text{V}\):
\[ I_1 = \frac{3}{2000} = 1.5 \, \text{mA} \]
Step 5: Calculate \(I_Z\), the Zener Current
By Kirchhoff’s Current Law (KCL), \(I = I_Z + I_1\):
\[ I_Z = I - I_1 = 7 \, \text{mA} - 1.5 \, \text{mA} = 5.5 \, \text{mA} \]
So, the correct answer is: 5.5 mA
Top Questions on applications of diode
- The electrostatic potential due to an electric dipole at a distance \( r \) varies as:
- JEE Main - 2024
- Physics
- applications of diode
- Find the current through Zener diode if its breakdown voltage is 5 V.
- JEE Main - 2024
- Physics
- applications of diode
- A full-wave rectifer with diodes D1 and D2 is used to rectify 50 Hz alternating voltage. The diode D1 conducts _______ times in one second.
- KCET - 2023
- Physics
- applications of diode
- A zener diode of power rating 1.6 W is to be used as voltage regulator. If the zener diode has
a breakdown of 8 V and it has to regulate voltage fluctuating between 3 V and 10 V. The
value of resistance Rs for safe operation of diode will be- JEE Main - 2023
- Physics
- applications of diode
- Find the output voltage of a non-inverting OP-AMP having \(R_1\) = 100 kΩ, \(R_f\) = 500 kΩ, when the input signal is of 2.0 V.
- CUET (PG) - 2023
- Physics
- applications of diode
Questions Asked in JEE Main exam
- Let \[\vec{a} = \hat{i} + \hat{j} + \hat{k}, \quad \vec{b} = -\hat{i} - 8\hat{j} + 2\hat{k}, \quad \text{and} \quad \vec{c} = 4\hat{i} + c_2\hat{j} + c_3\hat{k} \]be three vectors such that \[\vec{b} \times \vec{a} = \vec{c} \times \vec{a}.\]If the angle between the vector $\vec{c}$ and the vector $3\hat{i} + 4\hat{j} + \hat{k}$ is $\theta$, then the greatest integer less than or equal to $\tan^2 \theta$ is:
- JEE Main - 2024
- Vector Algebra
- 10 mL of gaseous hydrocarbon on combustion gives 40 mL of CO\(_2\)(g) and 50 mL of water vapour. The total number of carbon and hydrogen atoms in the hydrocarbon is ______ .
- JEE Main - 2024
- Hydrocarbons
- If each term of a geometric progression \( a_1, a_2, a_3, \dots \) with \( a_1 = \frac{1}{8} \) and \( a_2 \neq a_1 \), is the arithmetic mean of the next two terms and \( S_n = a_1 + a_2 + \dots + a_n \), then \( S_{20} - S_{18} \) is equal to
- JEE Main - 2024
- Arithmetic Mean
A body of mass 1000 kg is moving horizontally with a velocity of 6 m/s. If 200 kg extra mass is added, the final velocity (in m/s) is:
- JEE Main - 2024
- speed and velocity
- $\textbf{Choose the correct statements about the hydrides of group 15 elements.}$
A. The stability of the hydrides decreases in the order \(\text{NH}_3 > \text{PH}_3 > \text{AsH}_3 > \text{SbH}_3 > \text{BiH}_3\)
B. The reducing ability of the hydrides increases in the order \(\text{NH}_3 < \text{PH}_3 < \text{AsH}_3 < \text{SbH}_3 < \text{BiH}_3\)
C. Among the hydrides, \(\text{NH}_3\) is a strong reducing agent while \(\text{BiH}_3\) is a mild reducing agent.
D. The basicity of the hydrides increases in the order \(\text{NH}_3 < \text{PH}_3 < \text{AsH}_3 < \text{SbH}_3 < \text{BiH}_3\)
Choose the most appropriate from the option given below:- JEE Main - 2024
- p -Block Elements
Concepts Used:
Applications of diode
Diodes are used in many applications. By removing the signal component, several of them convert AC current to DC current also are known as rectifiers when used in this position. Diodes act as electric switches and can block voltage spikes, making them ideal for surgical protectors. They are hired to do digital logic. Some things are made from diodes such as power supply and voltage doubles. The sensors, as well as light on lighting devices and lasers, depend on LEDs. For electronic tuning, varactors are used, and for compressing transients in AC lines varistors are used. Zener diodes are used as voltage regulators where varactors are used for electronic tuning, and varistors are used for compressing transients in AC lines.
On the base of diodes, transistors and op-amps are built. The most common diode mode is the p-n junction. One (n) object with electrons as the charging conductor closes the second object (p) with holes (well-charged particles acted as depleted areas of electrons) as the charge carriers on this type of diode. Where they connect, the narrowing space forms, where electrons are dispersed to fill holes in the p-side. This effectively stops the flow of electrons. When a positive voltage is given to the p-side of this junction, electrons may easily move from it and the current flows into the diode to fill the holes. The shrinkage area expands as the negative bias interacts (i.e., negative voltage is given to the p-side), making the electrons harder to move across.
SUBSCRIBE TO OUR NEWS LETTER
