Select Goal &
City
Select Goal
Explore
Question:
For polymers, match each process with the most suitable application listed.Process Application P Extrusion 1 Producing complex parts with close tolerance Q Injection molding 2 Producing thermosetting plastic components R Blow molding 3 Producing long uniform sections S Compression molding 4 Producing hollow shapes
For polymers, match each process with the most suitable application listed.
| Process | Application | ||
|---|---|---|---|
| P | Extrusion | 1 | Producing complex parts with close tolerance |
| Q | Injection molding | 2 | Producing thermosetting plastic components |
| R | Blow molding | 3 | Producing long uniform sections |
| S | Compression molding | 4 | Producing hollow shapes |
Updated On: Jul 12, 2024
- P-3, Q-1, R-2, S-4
- P-2, Q-3, R-4, S-1
- P-4, Q-2, R-1, S-3
- P-3, Q-1, R-4, S-2
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
The correct option is (D): P-3, Q-1, R-4, S-2.
Was this answer helpful?
0
0
Top Questions on Polymers
- Which among the following is a biodegradable polymer?
- Caprolactam when heated at high temperature in presence of water, gives
- Match List -I with List-IIChoose the correct answer from the options given below:
List -I List-II A Buna-S I Vinyl chloride B Neoprene II 1,3-Butadiene and styrene C PVC III Tetra flouroethene D Teflon IV Chloroprene - Which of the following is a homopolymer?
Ziegler-Natta Catalyst is used in the manufacture of
View More Questions
Questions Asked in GATE PI exam
- A metallic cylindrical pressure vessel, used to store compressed air in a plant, has 1 m mean radius and 4 mm wall thickness. The maximum allowable normal and shear stresses in the cylindrical portion of the vessel are 100 MPa and 40 MPa, respectively. Considering only these data in the design, the maximum allowable internal gauge pressure (in MPa) of the compressed air is ______ . (Rounded off to 2 decimal places)
- GATE PI - 2024
- Stress-Strain behavior of metals and alloys
- The following differential equation governs the evolution of variable \(x(t)\) with time \(t, t \geq 0\).
\(\frac {d^2x}{dt^2} + 4x = e^{-t}\)
Given the initial conditions \(x = 0\) and \(\frac {dx}{dt} = 0\) at \(t = 0\), the value of \(x\) at \(t =\frac {\pi}{8}\) is _____ . (Rounded off to 3 decimal places)- GATE PI - 2024
- Differential Equations
- A CNC milling operation is carried out by moving the tool from the point A to point B in anti-clockwise direction to cut a slot of quarter circle with center at C, as shown. The coordinates of the points A and B are (0,0) and (10,10), respectively. All dimensions are in mm. If the feed rate at point P along x-axis is 6 mm/min, then the feed rate (in mm/min) at point P along y-axis is ______ . (Rounded off to 1 decimal place)
- GATE PI - 2024
- Machining parameters and material removal rate
- In a sand mold, a sprue of height \(h_2=200\ mm\) is to be provided for maintaining the molten metal flow rate of \(10^6\ mm^3/s\). The height of liquid column above the point 2 is kept constant at \(h_c=25\ mm\). The cross-sectional areas of the sprue at points 2 and 3 are \(A_2\) and \(A_3\), respectively. The points 1 and 3 are at the atmospheric pressure. Assuming the gauge pressure at point 2 to be zero as the limiting case to prevent aspiration effect, the ratio \(\frac {A_3}{A_2}\) _____ . (Rounded off to 2 decimal places)
- GATE PI - 2024
- Fluid Mechanics
- An assembly line consists of three work stations (\(S_1, S_2\) and \(S_3\)) in series to assemble a toy. The times required to perform tasks at these stations are 6, 4 and T minutes, respectively. If the efficiency of the assembly line in the steady state is 75%, then the maximum value of T (in minutes) is _____ . (Answer in integer)
- GATE PI - 2024
- Production Control
View More Questions
SUBSCRIBE TO OUR NEWS LETTER
COLLEGE NOTIFICATIONSEXAM NOTIFICATIONSNEWS UPDATES
Download the Collegedunia app on 
© 2024 Collegedunia Web Pvt. Ltd. All Rights Reserved