A scramjet engine features an intake, isolator, combustor, and a nozzle, as shown. Station 3 indicates the combustor entry point. Assume stagnation enthalpy is constant between Stations 1 and 3, and air is a calorically perfect gas with specific heat ratio $\gamma$. Select the correct expression for Mach number $M_3$ at the inlet to the combustor from the options given.
Step 1: Energy relation.
Between station 1 (free stream) and station 3 (combustor entry), stagnation enthalpy is constant:
\[
h_0 = c_p T_0 = \text{constant}
\]
Thus, stagnation temperature is preserved:
\[
T_{0,1} = T_{0,3} = T_0
\]
Step 2: Temperature–Mach relation.
For a calorically perfect gas:
\[
\frac{T_0}{T} = 1 + \frac{\gamma -1}{2} M^2
\]
At station 3:
\[
\frac{T_0}{T_3} = 1 + \frac{\gamma-1}{2}M_3^2
\]
At free stream:
\[
\frac{T_0}{T_\infty} = 1 + \frac{\gamma-1}{2}M_\infty^2
\]
Step 3: Express $M_3$.
From station 3 relation:
\[
M_3^2 = \frac{2}{\gamma -1}\left(\frac{T_0}{T_3}-1\right)
\]
But $T_0$ is related to free stream values:
\[
\frac{T_0}{T_3} = \frac{T_0}{T_\infty}\cdot \frac{T_\infty}{T_3}
\]
\[
= \left(1+\frac{\gamma-1}{2}M_\infty^2\right)\frac{T_\infty}{T_3}
\]
Substitute into $M_3^2$:
\[
M_3^2 = \frac{2}{\gamma -1}\left[\frac{T_0}{T_3}\left(1+\frac{\gamma-1}{2}M_\infty^2\right)-1\right]
\]
Step 4: Take square root.
\[
M_3 = \sqrt{\frac{2}{\gamma -1}\left[\frac{T_0}{T_3}\left(1+\frac{\gamma-1}{2}M_\infty^2\right)-1\right]}
\]
This matches option (B).
\[
\boxed{M_3 = \sqrt{\dfrac{2}{\gamma-1}\left[\dfrac{T_0}{T_3}\left(1+\dfrac{\gamma-1}{2}M_\infty^2\right)-1\right]}}
\]
An ideal ramjet with an optimally expanded exhaust is travelling at Mach 3. The ambient temperature and pressure are 260 K and 60 kPa, respectively. The inlet air mass flow rate is 50 kg/s. Exit temperature of the exhaust gases is 700 K. Fuel mass flow rate is negligible compared to air mass flow rate. Gas constant is \( R = 287 \, {J/kg/K} \), and specific heat ratio is \( \gamma = 1.4 \). The thrust generated by the engine is __________ kN (rounded off to one decimal place).
A monopropellant liquid rocket engine has 800 injectors of diameter 4 mm each, and with a discharge coefficient of 0.65. The liquid propellant of density 1000 kg/m³ flows through the injectors. There is a pressure difference of 10 bar across the injectors. The specific impulse of the rocket is 1500 m/s. The thrust generated by the rocket is __________ kN (rounded off to one decimal place).
In the given figure, the numbers associated with the rectangle, triangle, and ellipse are 1, 2, and 3, respectively. Which one among the given options is the most appropriate combination of \( P \), \( Q \), and \( R \)?
A regular dodecagon (12-sided regular polygon) is inscribed in a circle of radius \( r \) cm as shown in the figure. The side of the dodecagon is \( d \) cm. All the triangles (numbered 1 to 12 in the figure) are used to form squares of side \( r \) cm, and each numbered triangle is used only once to form a square. The number of squares that can be formed and the number of triangles required to form each square, respectively, are:
The number of patients per shift (X) consulting Dr. Gita in her past 100 shifts is shown in the figure. If the amount she earns is ₹1000(X - 0.2), what is the average amount (in ₹) she has earned per shift in the past 100 shifts?
The equation of a closed curve in two-dimensional polar coordinates is given by \( r = \frac{2}{\sqrt{\pi}} (1 - \sin \theta) \). The area enclosed by the curve is ___________ (answer in integer).
For a three-bar truss loaded as shown in the figure, the magnitude of the force in the horizontal member AB is ____________ N (answer in integer).