List of top Fabric Manufacture, Structure and Properties Questions on Weaving asked in GATE TF

In a projectile weaving machine, the projectile travels through the shed at an average speed of 24 m/s taking \( \frac{2}{3} \) of the loom cycle. If the efficiency of the weaving machine is 90%, the weft insertion rate (m/min) is:
In a projectile weaving machine, the projectile travels through the shed at an average speed of 24 m/s taking \( \frac{2}{3} \) of the loom cycle. If the efficiency of the weaving machine is 90%, the weft insertion rate (m/min) is:
Amongst the following, producing a dense fabric in a weaving machine require(s):

Group I lists the components of the weaving machine and Group II lists their functions. Match the component with its function.


 

Amongst the following, the component which is NOT a part of single-bed warp knitting machine, is:
Profile reed is used in:
The force exerted by the reed on the cloth-fell at the instant of beat-up (weaving resistance) depends on
Consider the following reasons of shuttle loom stoppage. P. Breakage of warp yarns
Q. Entrapment of shuttle inside the shed
R. Flying of shuttle out of the shed
S. Slackening of a warp yarn
The correct combination that triggers the warp protector motion is