List of top Water Resources Engineering Questions on Maximum Shear Stress Theory asked in CUET (PG)

A cantilever beam of T cross-section carries uniformly distributed load. Where does the maximum magnitude of the bending stress occur?
In a direct shear test, the shear strength and normal stress on a dry sand sample at failure are 0.6 kg/cm2 and 10 kg/cm2, respectively. The angle of internal friction of the sand will be nearly
Given below are two statements:
Statement - I: Rate of change of shear force (f) at any section of a loaded beam is equal to the Rate of Loading (w) at the section i.e. \(w=\frac{df}{dx}\)
Statement - II: Rate of change of bending moment at any section of a loaded beam represent the shear force (F) at the section is \(f=\frac{dm}{dx}.\)
In the light of the above statements, choose the correct answer from the options given below :
Match List I with List II
List IList II
A.Shear force (unit)I.Newton/Area
B.StressII.Newton
C.StainIII.Lateral Stain / Axial Stain
D.Poisson Ration (N)IV.Change in length / Actual length
Choose the correct answer from the options given below :
Given below are two statements:
Statement - I: The maximum shear stress ( q max ) for a rectangular section is 3/2 times average shear stress.
Statement - II: The maximum shear stress ( q max ) for a circular section is 4/3 times the average shear stress.
In the light of the above statements, choose the correct answer from the options given below :
For the design of a cast iron member, the most appropriate theory of failure is
According to maximum Shear stress failure theory, yielding occur in the material when