1. >Common University Entrance Test
  2. >Electronics Engineering
Found 5  QuestionsSET DEFAULT
Selected Filters
    Common University Entrance Test Electronics Engineering Electric Circuit
Exams
Years
Subjects
Topics

List of top Electronics Engineering Questions on Electric Circuit asked in Common University Entrance Test

A circuit which resonates at 1 MHz has a Q of 10. Bandwidth between half-power points is
  • CUET (PG) - 2025
  • CUET (PG)
  • Electronics Engineering
  • Electric Circuit
In the figure shown below, the ideal switch has been open for a long time. If it is closed at \(t=0\), then the magnitude of the current (in mA) through the 4 k\(\Omega\) resistor at \(t=0+\) is
  • CUET (PG) - 2025
  • CUET (PG)
  • Electronics Engineering
  • Electric Circuit
For the two port network shown below, The impedances \( Z_{11}, Z_{12}, \) and \( Z_{22} \) (in \( \Omega \)) are A. \(6\Omega\), B. \(9\Omega\), C. \(24\Omega\). Choose the correct sequence of \(Z_{11}, Z_{12}, Z_{22}\) in answer from the options given below:
  • CUET (PG) - 2025
  • CUET (PG)
  • Electronics Engineering
  • Electric Circuit
In the circuit shown below, the current through the inductor (in A) is
  • CUET (PG) - 2025
  • CUET (PG)
  • Electronics Engineering
  • Electric Circuit
The nodal method of circuit analysis is based on
  • CUET (PG) - 2025
  • CUET (PG)
  • Electronics Engineering
  • Electric Circuit