List of top Civil Engineering Questions on Irrigation Engineering and Hydraulic Structures asked in AP PGECET

What type of dam is constructed using the hydraulic fill method?
What type of canal is aligned along the natural watershed line?
Flow over a spillway of a dam is to be treated as
The ratio of the weight of water consumed from various sources by a plant in order to produce one unit weight of plant above the root zone is called
The technical term used to relate the volume of water and the area of crop it matures is
Total area of land in the irrigation boundary of a project (including the zones which can be cultivated and which cannot be cultivated) is known as
The technical term used to relate the volume of water and the area of crop it matures is
Total area of land in the irrigation boundary of a project (including the zones which can be cultivated and which cannot be cultivated) is known as
What type of dam is constructed using the hydraulic fill method?
What type of canal is aligned along the natural watershed line?
Flow over a spillway of a dam is to be treated as
The ratio of the weight of water consumed from various sources by a plant in order to produce one unit weight of plant above the root zone is called
The probability of a 10-year flood to occur at least once in the next 4 years is.........
In an irrigated plot the net irrigation requirement of crop is found to be 14.9 cm, the application efficiency is 80% and water conveyance efficiency is 70%. What is the gross irrigation requirement (GIR)?
If sensitivity of an irrigation module is 0.5, then what percent variation in outlet discharge will be caused by 50 percent variation in canal water depth?
Which of the following is a method for estimating evaporation from a water surface?
A city supply of 15000 cubic meters of water per day is treated with a chlorine dosage of 0.5 ppm. For the purpose, the requirement of 25% bleaching powder per day would be .......
As compared to fresh river water, sea water contains .........
A drainage basin has an area of 210 km$^2$. The average depth of rainfall received by it during a monsoon period is computed as 65 cm, while the runoff measured at its outlet during the same period is estimated to be $5.68 \times 10^7$ m$^3$. What percentage of rainfall has become runoff?
What should be the diameter of an open well to give a safe yield of 4.8 l/s? Assume working head as 3.75 m and sub soil consists of fine sand of \( C = 0.5\ \text{h}^{-1} \).
For medium silt whose average grain size is 0.16 mm, Lacey’s silt factor is likely to be
What is the discharge capacity required at the outlet to irrigate 2200 hectares of sugarcane having a kor depth of 17 cm and kor period of 30 days?
In a 1:100 scale model of a harbour, the time which will correspond to the prototype tidal period of 12 hours will be ............
If atmospheric pressure head is 9 m, vapour pressure head (maximum) is 1 m, failure head is 40 m and cavitation coefficient \( \sigma \) is 0.15, then height at which the turbine can be set above the tailrace level is ...........
The optimum depth of kaw-watering for rice crop is