List of top Civil Engineering Questions on Surveying asked in AP ECET CE

Which of the following is a GIS operation?

Which of the following is the set of classification of static GPS surveying technology?

If the length and reduced bearing of a line are 100 m and S60°W respectively, then the departure is

The size of the theodolite is defined according to the

The multiplying constant and additive constant of a tacheometer are 100 and 2 m respectively. When the line of sight is horizontal and the staff held vertically, the staff readings are 2.780 m and 1.280 m respectively, then the distance between the tacheometer and staff station is

When a line changes its direction, the angle of the forward line with the external of the preceding line is known as

Which of the following is the first operation of Total station when it is sighted to the target?

If the fore bearing of a line AB is S$15^\circ40'$W, then the back bearing of line is

If the sum of interior angles in a closed traverse is 1080º, then the number of sides in a traverse is

For land survey using theodolite, if N is the number of sides of a closed traverse, then the angular error of closure in minutes should not exceed

The sum of rises and sum of falls in levelling are 1.125 and 5.635 respectively. If the RL of last point is 246.875, then the RL of first point is

Two points A and B are taken on opposite banks of a river in reciprocal levelling. When the level was set up near A, the staff readings on A and B were 1.225 and 2.375. When the level was set up near B, the respective readings were 0.945 and 2.115. The true differences of level between A and B is

When contours of a different elevations cross each other, then it indicates a

A 30 m chain is divided into

The main survey stations are located on the ground by